NAP-56A Higher Temperature Resistivity Flammable Gas Sensor
Negotiable /Piece
Min.Order:1 Piece
NAP-56A is not made with thermoplastics to achieve a higher temperature resistivity. The pin locations and dimensions are compatible to NAP-55A for the convenience of current users of Nemoto NAP-55A. The gas sensitivity is better than NAP-55A by about 15%. Users are to pay attention to this higher gas sensitivity upon calibration.
* Target gases & concentration
gases | Detection range | |
Methane | CH4 | 0.05-5% (0.05-2%) |
Ethane | C2H6 | 0.05-3.2% (0.05-1.5%) |
Hydrogen | H2 | 0.05-4% (0.05-1.5%) |
Hydro-carbons | CnH2n+2 | 1-100%LEL (1-50%LEL) |
( ) is a detection range in high accuracy
* Ratings
Item | Ratings |
Supply voltage | DC 2.5±0.25V AC 2.5±0.25V(RMS 50-60Hz) |
Current (2.5V applied) | DC 150 - 170mA AC 150 - 170mA(RMS 50-60Hz) |
Ambient temperature | In operation -10 ~ +50℃ In storage -10 ~ +50℃ |
Ambient humidity | In operation : less than 95%RH In storage : less than 99%RH (without dew condensation) |
Structure & appearance of NAP-56A
* Gas sensitivity characteristics
Gases and concentration | Output values |
Output in clean air | -35~ +35mV |
Methane 3,000ppm | 15~ 23mV |
Iso-butane 1,400ppm | 12~ 18mV |
Hydrogen 1,400ppm | 10~ 17mV |