SMT Automatic Nozzle High Pressure Water Cleaning Machine
Negotiable /Set
Min.Order:1 Set
SMTfly Electronic Equipment Manufactory
Our official Website:
1.Pneumatic Nozzle Cleaning Machine,Nozzle Washing Machine Features:
A one-time into the 36 nozzle, please wash large;
Completely solve the dirt is difficult to clean the dirt impurities;
Though the smaller nozzle aperture but cleaning is clean;
Cleaning more thoroughly directly extend the life of the nozzle;
No damage to the surface of the nozzle coating, reflective plate;
Use environmentally friendly deionized water or distilled water to clean;
Automatic continuous cleaning, automatic drying;
Operation is more simple and convenient;
Increased intelligent water storage check function
Applicable to all kinds of placement machine.
2.Automatic Nozzle Cleaner,CW-36 Specifications:
Air pressure | Air pressure | Compressed air |
Intake pressure setting | 0.5~0.55MPa | |
Injection pressure setting | 0.35~0.38MPa | |
Nozzle injection pressure | ≤0.4MPa | |
Consumption of gas | ≤260Nl/min | |
tube | Intake trachea | ¢12 tubes |
Drainage tank | ¢8tubes | |
Cleaning fluid | Cleaning fluid | Industrial deionized water |
Consumes liquid | ≤300cc/h(5cc/min) | |
Storage tank capacity | 1200cc | |
power supply | power supply | AC220~240V |
plug | 3-Pin | |
Consume electricity | ≤0.1Kw | |
surroundings | Working temperature | -5~ (But not frozen) |
Liquid temperature | 0~ (But not frozen) | |
Working environment humidity | 10~60%RH | |
Equipment placed in the environment humidity | 10~60%RH | |
dust | 0.1mg/m³(There is no conductive dust) | |
Corrosive gases | Not allowed | |
other | Dimensions | 655(L) x 560(W) x 475(H) |
weight | ~(Contains cleaningsolution2000cc) |
3. Contrast with traditional cleaning :
1、 Artificial wind guns
① Manual cleaning efficiency is low, the nozzle surface and the lumen can not be cleaned, the hole with a steel wire stabbed easily damaged;
② Cleaning effect difference;
③ The use of cleaning fluid and alcohol may penetrate to cause the reflective layer to fall off.
before cleaning after cleaning
2、 Ultrasonic cleaning
① Low cost and high efficiency;
② Cleaning process can easily lead to collision
between the nozzle, resulting in damage to the surface
of the black coating or fall off;
③ Cleaning fluid on the nozzle surface coating damage, greatly reducing the use of nozzle life;
④ Can not completely clean the nozzle surface and lumen;
⑤ For the latest 01005 and 0201 nozzle can not be a
good cleaning, mainly due to the nozzle hole is too small, ultrasonic cleaning can cause vacuum bubbles can not be discharged and cleaning is not clean.
4.Cleaning effect A
Cleaning effect B
If you need the machine,please contact us:
Skype/Email: s5@smtfly.com
WhatsApp/Wechat: +86 136 8490 4990