Product Details

thermal shock chamber price

Thermal Shock Chamber

Thermal Shock Test Chamber

application:
Temperature shock chamber is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short period, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, electronics amongst other materials. The test result can be used as a reference or basis for product improvement.
technical parameters:

Model	TS-42(A~C)	TS-80(A~C)	TS-150(A~C)		TS-252(A~C)	TS-450(A~C)
Internal Dimension WxHxD ( mm)	400x350x350	500x400x400	600x500x500		700x600x600	800x750x750
External Dimension WxHxD (mm)	1400x1800x1400	1550x1950x1550	1600x2000x1700		1700x2100x1750	1800x2200x1900
Temperature Range of Testing zone	Type A:-40℃~+150℃ ( 200℃ is Optional)	Type B:-55℃ ~+150℃ ( 200℃ is Optional )			Type C:-65℃ ~+150℃ ( 200℃ is Optional)
	High temperature Range of Testing zone: +60ºC~+150ºC ( 200ºC is Optional); Low Temperature Range of Testing Zone: -10ºC~-40ºC / -55ºC / -65ºC
Exposure Time of High/Low Temperature	Exposure Time of High Temperature: +60℃ ~ +150℃ (200℃ is Optional) 30Mins
	Exposure Time of Low Temperature : -10℃~Type A:-40℃ / Type B -55℃ / Type C -65℃ 30Mins
Temperature of Heat- Storing Slot / Heating Time	RT~200℃/About 45mins
Temperature of Cool- storing Slot / Cooling Time	RT~-75℃/ About 100mins
Temperature Recovery Time/Conversion Time	≤5min/≤5sec
Control Accuracy / Distribution Uniformity	±0.5℃/±2℃
Internal and External Material	Material of the inner box is SUS 304# stainless steel,of the outer box is stainless steel or SEE cold-rolled steel with paint coated.
Insulation Material	High temperature resistant , high density , formate chlorine , ethyl acetum foam insulation materials
Mechanics	P.I.D+S.S.R+ Micro-computer balanced temperature control system
Cooling System	Semi-hermetic double-stage compressor(water-cooled type) /Hermetic double-stage compressor (air-cooled type)
Security Protection Devices	Non-fuse breaker, high and low pressure protective switch of the compressor , refrigerator high-pressure protective switch , failure warning system, electronic alarm
Accessories	viewing window(special order)
Compressor	French 'Tecumseh' Brand, Germany Bizer Brand
Power	AC220V 1∮ 3 lines ,50/60HZ, AC380V 3∮ 5 lines ,50/60HZ
Weight (Approx)	450	600	750	950			1200

Temperature shock chamber features:
1.It is divided into three zones: high temperature zone, low temperature zone, and testing zone. The test sample is in static mode.
2.Using touch-control graph control as operation interface, easy to operate.
3.Applying wind route conversation to the shock method to distribute temperature to the testing zone for cold and thermal shock measurement.
4.For high temperature shock or low temperature shock, max. time is up to 999H, and max. circulation cycles are 9999 times.
5.The system can be used for automatic Circulation Shock or manual selective shock.
6.Adopt binary cooling system, with quick cooling effect. Cooling method is water cooling.
7.Can entering normal temperature. RS-232 and RS-485 communication.
Short introduction about ASLi factory:
We are a long history testing equipment manufacturer, in the past 28 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing grammable thermal shoc chamber is our star products , and we had obtained the CE certification for this machine