Introduction:
The device is a constant temperature and humidity moisture permeability test device, which is suitable for sportswear and other requirements of the waterproof, moisture permeability of both the fabric, as well as plastic film, processed paper and other moisture-resistant packaging materials for the purpose of moisture permeability evaluation test.
Place a quantity of anhydrous calcium chloride into the empty moisture-permeable cup. Then install the sample and seal the moisture-permeable cup with the sample. The moisture permeable cup of the sealed package was placed in a laboratory for fixed temperature and humidity conditions for a period of time, and the moisture permeability of the sample was calculated by increasing the weight of anhydrous calcium chloride, thereby determining the moisture permeability of the sample.
Application:
The device is a constant temperature and humidity moisture permeability test device, which is suitable for sportswear and other requirements of the waterproof, moisture permeability of both the fabric, as well as plastic film, processed paper and other moisture-resistant packaging materials for the purpose of moisture permeability evaluation test.
Standards:
JIS L1099A Testing methods for water vapour permeability of textiles
JIS Z 0208 Testing methods for determination of the water vapour transmission rate of moisture-proof packaging materials
Technical Parameters
Items | Parameters |
Temperature range | 20-50℃(Accuracy :±0.3℃) |
Moisture range | 50-95%(Accuracy :±2.0%) |
Freezer | Air-cooled airtight compress |
Cooler | Multi - stage heat sink cooler |
Humidifier | Pot-type humidifier |
Heater | Finned radiator |
Circulating blower | Blower |
Disc sample rack | 270mm、2 paragraphs |
Rotation speed of sample rack | 8r.p.m |
Water supply method | Pump pumping |
Water tank | 10L |
Moisture-permeable cup | JIS L 1099A Act requirements (10 groups) |
Power | AC 100V 50/60HZ 3KW |
Indoor dimension | W350×D350×H500mm |
Outside size | W1100×D550×H1500mm
|