JL Series Portable Oil Purifier

Application:

As composed of three-stage precise filtering, this machine is an ideal substitute of the board-frame oil purifier and the centrifugal oil purifier. It is also can serve as precise filtering and oiling.

Advantage

The product is equipped with three-stage purification, portable, easy to operate, very low price, no need of purification paper, no contamination to the ground. The product can effectively purify the tiny and fine mechanical impurity min oil, enabling it to be a prior choice of power industry, petroleum, chemical, metallurgy, mechanics and railway for oil filling, oil drawing and high precision impurity removal of mutual inductor, lathe, and oil breaker which do not use large quantity of oil.

Technical Parameter

Operation Instruction

1 put the machine on a place where is flatness, check whether any parts of the machine is lax, especially for the connected parts between generator and oil pump.

2 connect the power supply correctly, check whether the round direction of the oil pump is correct, if not, pls exchange the power phases.

3 connect the oil inlet pipe and oil outlet pipe tightened. Note the must tighten the oil outlet pipe to oil outlet valve, otherwise, the oil outlet pipe will be pushed off when the pressure is so high.

4 when tighten the oil inlet pipe and oil outlet pipe, open the generator, the oil pump begin to work normally, the purified oil will be fine through the filters.

5 when need to suck the oil in another container as the oil in one container is sucked completely, pls do it as soon as possible for avoiding the oil pump running without oil for a long time. If you can not do it quickly, pls stop the machine, and when the oil inlet pipe is tightened well, start the machine.

Maintenance

1 the machine adopt mechanical purifying way and increase the density of filter net step by step in order to improve the precision of filtering. In this way, when the machine is working, the primary filter is easily jammed which cause the quantity of inlet oil is less than that of outlet oil.

  Resolving method: remove the cover of primary filter, take out the filter net, then use the clean oil which is the same type with the waste oil to clear. In this way, the machine can work normally.

2 If the oil raise so high when adding the oil, it will cause the temperature of the generator improve quickly, and the noise of the oil pump increase.

  Resolving method: 1 work as per the ruled oil raise. 2 work discontinuous.

3 the noise of the oil pump is so big.

  Resolving method: check whether the connecting axes of the oil pimp is homocentric. 2 check whether the screw is lax or dropped off.  If appear any problem as mention as above, pls recover it, then the machine can work normally.

4 strictly prohibit lacking phase in order to avoid burning generator.

5 the continuous working hours of the machine can not be over 150 hours, if the machine has working 150 hours without stopping, pls have the machine rest for 2 hours. 

Contact me freely at ansen@oilsolution.cn for details or other oil purifiers.

Whatsapp: 0086-13668080522