Name: XGH-1 aluminium alloy clamp suspension clamp
Brand: Wanxie
Availability: InStock

Product Details

Product Description

Suspension clamps are used to hange conductor or ground wire through insulator or link fitting to tower arms or sustation structures. The clamps are made of malleable iron or aluminum alloy.

The meaning of letter and arablic figure in the catalog are show as follows:

X-suspension clamp

G-fixed

S-double clamp

U-U bolt

J-Strength

H-aluminium alloy

F-corona control

K-under axle type

T-envelope type

A-with a socket-clevis

B-with U clevies

X-Hang-down type

The suspension angle of supension clamps is not less than 25º, the radius of curvature is not less than the dia of installed leads by 8, and the precentage of the grip on different kinds of leads to the capabiility of snap show in the following table.

Conducdtor	Constrtuction(Al/St)	Precentage%
ACSR	>1.7	12
	4.0-4.5	18
	5.0-6.5	20
	7.0-8.0	22
	11.0-20.0	24
Steel wire	Limited strenghed 1176-1274 N/mm2	14
Al-conductor		30

As the suspension clamps are used to AAC and ACSR, the conductor may be wound by aluminium tapes or performed armour rods for protection these taps or rods are included in the diameter of suitable conductor.

Type	Applicable conductor diameter	Main Dimensions(mm)					Failure Load (KN)	Weight(KG)
Type	Applicable conductor diameter	L	C	R	H	M	Failure Load (KN)	Weight(KG)
XGH-2	5.1-12.5	166	25	8	52.5	16	40	1.0
XGH-3	12.4-17.0	200	23	11.5	50.5	16	40	1.5
XGH-3H	12.4-17.0	180	22	10	50.0	16	50	1.5
XGH-4	19.0-23.5	225	27	13.5	59.5	16	40	23.0
XGH-5	24.2-28.0	260	32	16	70.0	16	60	3.0
XGH-6	25.0-35.0	216	35	17.5	68.0	16	60	3.6

Clamp bodies and keepers are malleable iron, cotter-pins are stainless steel, the othe parts are steel. All ferrous parts are hot-dip galvanized.