3/4 Inch 588N.m Electric Impact Wrench; Portable Electric Wrench

Application:

Electric impact wrenches are most often in use in the car industry for removing lug nuts on tires to change a tire and to tighten them when replacing a tire. Both air and electric styles will effectively perform this task. There are other applications for engine bolts and parts where a pre-determined amount of torque is applied. Impact wrenches are also useful on construction sites for metal framework and on assembly lines for many products.

General operating instruction:

The Electric Impact Wrench is equipped with a rocker-type, trigger that can switch between clockwise (forward) rotation to counterclockwise(reverse) rotation. 
1. Press the desired Socket (sold separately) onto the Anvil. 
2. Plug the Power Cord into a grounded outlet. 
3. Press the LOWER part of the Trigger for clockwise (FORWARD) rotation or the UPPER part of the trigger for counterclockwise (REVERSE) rotation. 
4. When finished, release the Trigger. 
Note: The amount of actual torque may vary depending on the condition of the threads and other factors. If tightening critical components, check the actual torque applied to the fastener with a mechanical torque wrench (not supplied). 
5. To prevent accidents, turn off the tool and disconnect its power supply after use. Clean, then store the tool indoors out of children's reach.

CAUTION!

To prevent injury: Use both hands to operate the Impact Wrench, keeping one hand on the Handle and the other hand on the Housing. Do not hold or touch impact sockets during use.

FEATURES:

All electric impact wrenches turn both counterclockwise to unscrew a lug nut and clockwise in order to replace and tighten lug nuts. They also all have a trigger to pull in order to supply power to them. Also has an additional handle on the left side for additional gripping power so they do not slide off the lug nut when it is completely tight.

RELATED PRODUCTS:

Our factory have full sizes of electric impact wrenches to choose, including 1 inch, 1/2 inch, 3/4 inch and 3/8 inch drives. Awaiting for your inquiry.

Specifications:

Detailed specification for our products, pls check below tables:

Model number: PT0201901

Collect chuck size:19mmX19mm

No-load speed: 1900rpm

Rated input power: 600W

Rated input voltage: 110~220V

Rated frequency: 50/60Hz

Max torque: 588N.m

Capacity(Bolt size): M16-M24

Warranty: 12 months