The introduction of adhesive CHMA600 is dual-component, 10:1 ratio, 100% reactive adhesive, designed for seaming and jointing acrylic solid surfaces and other surfacing materials containing densified Polyester Sheet, Thermoplastic Plastic, GRP, Aluminium alloy. It apply to kitchen & bathroom countertops, hotel worktops . It can fabricate a seamless benchtop, sink and splashback package, offering a hygienic solution that is well-suited to kitchens, food preparation areas, healthcare and bathroom environments as an alternative to stone, granite and marble benchtops. Solid surfaces adhesive are also ideal for bathroom vanity tops with integrated basins. The feature Strong bond performance CHMA600 adhesive exhibits superior bond strength on acrylic solid surface. Faster cure at room-temperature It features a working time of 8-13minutes, cure time of 20-25 minutes and can be sanded after 25minutes. Create seamless joints Advanced bonding strength and various surfacing colors assist the fabricators to produce virtuallly invisible joints on bonded surface. Custom colors available Extensive colors available and all brands of acrylic solid surfaces colors can be designed and formulated. Excellent performance It is UV stable and enronmental friendly for all articles are comply with European Commission Directive. It has excellent resistance to wear, impact, water, oil and high temperature. Supplied in ready-to-dispense cartridges 50ml dual cartridge&two mixing tips /per set 235ml dual cartridge&two mixing tips/per set Reduce labor and time with dispensing accossies Manual applicator gun & Motionless mixing tip Long shelf life It can be stored for one year from shipment day. Provide adhesives for private label customers Applicator Guns Handguns are very convenient and are desired in most situations, These are high quality professional tools that will provide years of service Static Mixer Tips Static Mixer tips are attached to the tip of the cartridge, and as the gun handle is depressed, glue and activator are extruded out of the 2-part cartridge, where they are mixed thoroughly in the static mixer tip as the two materials are driven through the tip. After passing through the static mixing tip, the fully mixed glue is dispensed at the tip of the static mixer tip.