DSHD-267 Open CupFlash Point Tester is designed according the National Standard GB/T267 “TestMethods for Flash Point and Fire Point of P etroleumProducts (Open Cup Methods)” and Industry Standard of Petrochemical SH/T0318“Technical Requirements for Open Cup Flash Point Tester”.
DSHD-267 Open CupFlash Point Tester is applies to determine the flash point and fire point oflubricating oil and Dark petroleum products.
B:Technical parameters
1. Power supply: AC 220V±10%,50Hz;
2. Outer crucible:
(1) Material: Carbonstructural steel;
(2) Diameter of upperopening: Φ100±5 mm;
(3) Height: 50±5 mm;
(4) Diameter of bottom:Φ56±2 mm;
3. Inner crucible:
(1) Material:Carbon structural steel;
(2) Diameter of upperopening: Φ64±1 mm;
(3) Height: 47±1 mm;
(4) Diameter of bottom:Φ38±1 mm;
(5) Scale line: there isa line 12 mm away from the rim of upper opening and a line 18 mm away from therim of upper opening.
4. Gas tube: thediameter of nozzle isΦ0.8~Φ1 mm. The inner surface of tube is smooth and it canadjust flame to 3 to 4 mm.
5. Heater: Heated by anelectric furnace. Heating power is 1000 W and adjustable.
6. Thermometer: 0~360°C; each scale division is 1 °C. It conforms to GB/T514.
7. Ambient temperature:≤35 °C;
8. Relative humidity:≤85%;
9. Total powerconsumption: not more than 1100 W;
C:More Open Cup flash point tester:
DSHD-3536 ClevelandOpen-Cup Flash Point Tester
DSHD-3536A AutomaticCleveland Open Cup Flash point tester
DSHD-3536A AutomaticCleveland Open Cup Flash point tester
DSHD-3536DFully-automatic Cleveland Open Cup Flash Point Tester
DSHD-3536-1 ClevelandOpen-Cup Flash Point Tester
DSHD-267 Open Cup FlashPoint Tester
