Wood pellet machine in high quality for hot sale can produce dia. 4 to 12mm pellets, its length can be adjustable optionally. The wood pellet machine is mainly applicable to crude fiber granulation, such as: sawdust, rice husk, cotton stalk,cotton seed hull, weeds and all kinds of crop straw, home wastage, waste plastics and the factory waste, the material of low adhesion rate, difficult to forming, etc. This type of wood pellet machine in high quality for hot sale is widely used in the biomass energy fuels plant, power plant, wood processing plants, etc. It is the ideal pressing shaping equipment with low investment but high profit feedback.

Ring Die of Wood Pellet Machine in High Quality for Hot Sale

Ring die is a key part of wood pelletizer. In the mass production of wood pellet, more than one set of ring die shall be prepared for the necessary replacement of the worn ones. The proper maintain and use tips would prevent the corrosion of the ring dies in the machine or in storage. The following are the 3 tips from Henan Fote Heavy Machinery Co., Ltd. for the wood pellet mill manufacturers:

1. After about 3-6 months of storage, the high oil content stuffing material has to be replaced with new ones, for the stuffing material will get hard, and cause the material jam in the production in future.

2. If the ring die in the ring die pelletizer need to be detached for use in the future, the same as the 2 tips above, the raw material in the ring die has to be pressed out of it and the high oil content stuffing material shall be filled in.

3. Ring die has to be put in a try, clean and ventilated rooms, if the production is going to stop for a long time, rub the surface of the ring die with the engine oil would prevent the ring die from corrosion, the ring die part would not be smooth enough for the raw materials to go through, the ring die shall not be put in the workshops, part of the raw materials are put in the workshops, and the raw materials are always with high moisture, if the ring die is in the same environment, the corrosion process would be accelerated.

Wood pellet machine in high quality for hot sale dies are made from several different types of metal, each with different advantages and disadvantages. Pellet press dies must be resistant to abrasion, strong to handle the forces of pellet production, corrosion resistant and give a good productivity. The ideal die of pellet press machine will be strong with low wearing and corrosion characteristics, and give maximum productivity.

Contact Infomation

Email: info@sinoftm.com

Website: /equipment/wood-pellet-mill.html

Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China