Super BMW AD 4 in 1 Interface

 

 

Super BMW AD Interface support both the K line and the CAN BUS system. It is an 4-in-1 interface, which can work for BMW Inpa k+can, BMW scanner 1.4.0, BMW DASH 2.02, and Hitag2 Programmer.

 

Features

 

1) BMW AD have the HITAG 2 features, it is V3.1 Very easy you can program key or transponder to bmw vehicles equiped with CAS module. Programming key is required to have read eeprom of immobilizer, to load into the software to specify what position you want to program this key or transponder, and then modify the eeprom dump and program it into the immobilizer.Also you can read and program internal key memory where are stored ODOMETER, VIN.

 

2) Super BMW AD Interface support both the K line and the CAN BUS system. It is an 4-in-1 interface, which can work for BMW Inpa k+can, BMW scanner 1.4.0, BMW DASH 2.02, and Hitag2 Programmer.

 

Supported Models 

 

1 Series: E81/E82/E87/E88 

3 Series: E30/E36/E46/E90/E91/E92/E93 

5 Series: E28/E34/E39/E60/E61 

6 Series: E24/E63/E64 

7 Series: E23/E32/E38/E65 

8 Series: E31 

 

X Series: X3-E83, X5-E53, X5-E70, X5-E71 

 

Z Series: Z1-E30, Z3-E36, Z4-E85/E86, Z5-E52 

 

MINI Series: MINI-R50/R52/R53/R55/R56/R57 

 

Supported Systems 

All systems of BMW series and OBD-II diagnostic system, including: 

Engine system 

Auto Transmission 

SRS 

ABS 

Cruise system 

Air-condition system 

EWS 

LKE 

BUS etc. 

 

 

 

HiTag2 Universal key programmer

 

Hitag2 programmer is universal key programmer, with additional option of key programming from dump. Just insert blank key or appropriate transponder you need to program. Device detects transponder type and will do everything automatically! 

 

Distinctive features of Hitag2 programmer

 

ALL types of Hitag2 transponders are fully supported! 

 

Widest range of supported cars, using Hitag2 protocol! 

 

Deep research work, has allowed us to make device, as much as possible correctly adding keys in the car, without damage to its functionality! 

 

Correct BMW key programming - RADIO REMOTE is working! 

 

Supported transponder types

 

PCF 7936 

PCF 7941 

PCF 7942/44 

PCF 7943 

PCF 7945 

PCF 7946 

PCF 7947 

PCF 7952 

Supported transponder modes

Password mode 

Crypto mode 

Supported protocols: 

Manchester 

Biphase 

 

Key generation from dump is available for the following cars

 

support BMW (2002 -2009 years) CAS/CAS2/CAS3 DG512 / CAS3 + DP512 

 

support matching BMW (2002 -2009 years) CAS/CAS2/CAS3 DG256 / CAS3 + DP512 key and remote control; the world's unique tec

 

 

 

 

 

BMW DASH V2.0

 

BMW DASH E6x V2.0 is intended to work with BMW 1, 3, 5, 6 and 7 series in "new" chassis. 

 

for chassis E60/E61(5') E63/E64(6') E65/E66(7') E87(1') E90/E91(3') 

 

Features

 

Connecting with all electronic control modules in the vehicle. 

For all electronic control units reading identification data, sw/hw versions, user information fields. 

For all electronic control units read and clear error (DTCs) memories - standart, shadow, history memory. 

Possibility to read/program memory of electronic control units (including CAS modules).

Synchronization DME/DDE and CAS.

 

 

 

 

 

BMW SCANNER 1.40

 

Short functions list

 

Determination of chassis, model, engine, gearbox and complete set 

 

Searching of all units and reading

 

- identification data 

- odometer value 

- VIN and ADFG 

- programming info (UIF) 

- errors (DTC) 

 

Reading and saving in files: 

 

- program memory 

- EEPROM 

- coding data 

- amount of DTCs and DTCs shadow-memory 

- live data 

- programming info (User Info Fields) 

Copying ZCS (IKE - EWS) and FA (IKE - LCM) coding 

... and other functions in various units 

"Unlocked" functions to show possibilities of full version

DTCs description in DME MS43.0, EWS3, SRS MRS4 

Clearing DTCs in same units 

EWS-DME synchronization code in DME MS43.0 

Live data in DME MS43.0, EWS3, SRS MRS2 and MRS4 

Status of all keys in EWS3 

EWS3 coding data interpretation 

Equipment correction in SRS MRS4 

 

 

 

 

BMW INPA K+CAN

 

Supported Protocols 

 

1.High-speed D-CAN and PT-CAN (500 kbit/s) 

2.Low-speed K-CAN (100 kbit/s) 

3.Standard BMW ports (BMW-OBD-interface) 

 

Functions

 

1.Reading and erasing codes. 

2.Live data 

3.Component testing 

4.Computer programming 

5.Adaptation and diagnosing 

6.Maintenance procedure explaining 

7.Integration of maintenance information 

8.Auto-coding and programming of engine, gearbox, airbag, light control computer, engine anti-theft computer etc. 

9.Testing some data (i.e. pressure, resistance and current) through the connection with cars. (Optional accessories is needed) 

 

Supported Models 

 

1 Series: E81/E82/E87/E88 

3 Series: E30/E36/E46/E90/E91/E92/E93 

5 Series: E28/E34/E39/E60/E61 

6 Series: E24/E63/E64 

7 Series: E23/E32/E38/E65 

8 Series: E31 

 

X Series: X3-E83, X5-E53, X5-E70, X5-E71 

 

Z Series: Z1-E30, Z3-E36, Z4-E85/E86, Z5-E52 

 

MINI Series: MINI-R50/R52/R53/R55/R56/R57 

 

Supported Systems 

 

All systems of BMW series and OBD-II diagnostic system, including: 

Engine system 

Auto Transmission 

SRS 

ABS 

Cruise system 

Air-condition system 

EWS 

LKE 

BUS etc.