Singlemode Ferrule:

The ferrules have a precise hair-thin Inner Diameter (ID) for aligning the optical fiber with various ODs. The ferrule’s ID is polished to a diameter of 0.001mm or larger than the OD of the optical fiber. Moreover, this ID has a precision of 0.001mm in concentricity and 0.0005mm in eccentricity for the singlemode ferrules used for optical communication components.

MultiMode Ceramic Ferrule:

At present, the Multimode Zirconia Ferrules are of low price and typically required for LAN and/or SAN Applications. However, multimode ferrules were often considered to be an inferior product when compared with the singlemode ferrules. Although low at cost, its capabilities vary and in the past, a constant supply of these ferrules was a problem.
In our case, the multimode zirconia ferrules are manufactured by an injection molding process similar to the manufacturing of our other zirconia ferrules. To achieve the same standard as the singlemode zirconia ferrules, we optimize the manufacturing process of the multimode ferrules and can provide constant supply of inventory.

The multimode ferrules vary in OD Sizes. The OD Ferrule Size for ST, FC and SC Connectors are φ2.5mm. The ferrule OD is φ1.25 mm for the MU and LC Connector Versions. The Multimode Ferrules are available with and without a flange.

Long Customized Ferrule:

There are two types of long ferrules consisting of φ2.5mm and φ1.25mm Outer Diameters. We can accommodate any ferrule specification such as the length and ferrule Inner Diameter.

Precise connections of the long ferrules are achieved by polishing both ends of the ferrule similar to the concentricity of a singlemode ferrule. By this process, optical devices can be connected without any functional failure.

We can also provide various types of custom configurations such as ferrules with slots to improve and make the connection easier. We can also manufacture to special ferrule configurations and requirements to meet your application needs.