ASTM A333 / A333M - Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
Product particular communication:

1) Size: 6.35 - 114.3 mm (OD) x 0.89 - 12.7mm (WT) ;

2) Tight tolerance, Smooth surface, Uniform mechanical property(Mechanical Properties equilibrium) ;

3) Heat treatment: BK, BKS, GBK, NBK,Stress Relief, Normalizing, Spheroidize Anneal, Annealing, Bright Annealing, Normalized, Quenched and Tempered, Solution Annealing, etc ;

4) Continuous stenciling as required ;

5) Rust prevention treatment, such as: immersion oil, lacquer, passivation, phosphating,etc;

6) Plastic plugs or caps on both ends as required ;

7) Packing Type: Round , Square, Rectangle, Hexagon. Streamline, etc.

8) Relevant Test: Chemical Component Analysis,Mechanical Properties(Ultimate tensile strength,Yield strength,Elongation),Technics Properties(Flattening Test,Flaring Test,Bending Test,Hardness Test,Blow Test,etc),

Exterior Size Inspection, Nondestructive Test,Hydrostatic Test;

9) Main Applications: Automobile and Bearing Industry, Mechanical and Structral Purpose, Boiler and Heat Exchanger, Hydraulic and Petrochemical Purpose, etc.

Commercial Information:

1) Delivery : Within 40 days ;

2) Min Order : 5 Tons; However, ERW and DOM Tube need 100 T Per Item ;

3) Packing way : As per our export standard for shipment ;

4) Term of payment : 30 T/T within 3 days after signing the contract, balance 70 before shipment. Or 30 T/T +70 irrepealable L/C ;

5) Delivery Port : Shanghai Port ;

6) Offer Validity : 5-7 Days ;

7) Container : 20\' or 40\', etc ;

8) Manufacture methods : Cold Finished Method.

Composition, %

A For each reduction of 0.01% carbon below 0.30%, an increase of 0.05% manganese above 1.06% would be permitted to a maximum of 1.35% manganese.

TENSILE REQUIREMENTS

IMPACT TEMPERATURE

Minimum Impact Test Temperature -45 C(-50 F)

Tag:

ASTM A333 Seamless pipe

ASTM A333 GR.B alloy pipe

Seamless pipe ASTM A333

ASTM A333

ASTM A333M

Seamless ASTM a333 pipe

Seamless ASTM A333m pipe