Features
Engine Model WD615 67G3-36 D6114ZGB
Type Water-cooled, I-arrangement, direct injection, turbocharger, 4stroke diesel engine
Number of cylinder 6 6
Bore’s stroke 126 X 130mm 114 X 135mm
Displacement 9.726L 8.27L
Rated power 162KW(220hp) 155KW(210hp)
Rated turn speed 2200r/min 2200r/min
Max. torque 843N.m@1400-1500rpm 850N.m@1300-1450rpm
Fuel consumption 231g/Kw.h 222g/Kw.h
Starting motor 24V, 7.5KW 24V, 7.5KW
Alternator 0.75KW 1KW
Governor Centrifugal, all speed governor
Cooling system Forced circulation by centrifugal pumo, pusher type fan
Driving
system Torque converter Type Double Turbine
Torque ratio 4
Transmission Type Planetary type, clutch with multiple discs, full power shift, semi-automatic
Pressure of transmission 1.1~1.5Mpa
Driving axle Major speed reducer Type Spiral bevel,1-stage reduction
Speed ratio 4.625
Speed reduction on wheel Type 1-stage planetary reduction
Speed ratio 4.875
Speed
(km/h) Gear 1 Gear2
Forward 0-10 0-34
Reverse 0-13
Steering Type Articulated frame, full hydraulic power with flow amplified
System, full-flow filtering
Steering angle ()35°
Setting pressure 12Mpa
Flow 135.4L/min@1680rmp
Brake Driving brake Caliper discs, air-hydraulic actuated on all four wheel
Parking brake Shoes-brake, applied by manual/air control
Emergent brake Using parking brake, applied by air pressure control
Maximum oil pressure 12.3Mpa
Air pressure 0.71-0.784Mpa
Hydraulic
system Working pump CBZb3160
Displacement of working pump 160ml/r
Control valve FPT32
Type Double valve
Setting pressure 17.0Mpa
Hydraulic cycle tirn(s)
Raise Dump Lower9empty, float down) Total
6.5 1.5 3.5 11.5
ZL50C with fork or side bucket
Specifications fork Side bucket
Overall length 8380mm 8134mm
Overall width 2750mm 2950mm
Overall height 3480mm 3440mm
Dump height 2550mm Obverse dump:2820mm
Side dump:3980mm
Dump reach 1620mm Obverse dump:1173mm
Rated load 5000kg 4600kg
Bucket diameter 2.5m²
Clipping diameter 1000mm(log fork)/380mm(pipe fork)
Operating weight 16500kg 17000kg
Equipment standard optional
WD6156G3-36 D6114ZGB
Liugong transmission Automatic bucket leveler
Liugong Axles Lift kick-out system
General cab ROPS/FOPS cab
Air conditioner Pilot control
3.0m³ General bucket 3.3m³ light material bucket
23.5-25 tyres 2.2m³ ore bucket
1.8m³ ore bucket Side-dump bucker
Log forl 4.0m³ material bucket

Specifications
Dimensions with Bucket
A:Height to top of cab and canopy  3483mm
B:Ground clearance 485mm
C:Machine center point to rear axle  2227mm
D:Wheelbase 3427mm
E:Overall length 8034mm
F:Maximum rollback at full height 58º
G:Bucket dump at full height 45º
H:Dump reach 1200mm
I:Maximum overall height 5070mm
J:Hinge pin height at full lift 4021mm
K:Dump height 2970mm
L:Maximum rollback at ground 41.5º
M:Hinge pin height at carry position 500mm
N:Maximum digging depth 60mm
O:Width over tires 2750mm
P:Tread width 2150mm
Q:Turning radius outside tires 6450mm
R:Maximum steering angle(each side) 35º
S:Bucket width 2976mm
T:Turning radius outside bucket 7720 mm