Main Products: 
SS Automatic Pet Bottle Blowing Machine , Bottle Blow Molding Machine 2 Cavities
USD $ 5000 - $40000 /Square Meter
Min.Order:1 Square Meter
Quick Details View All >
Semi Automatic Bottle Blowing Machine 2600BPH For Juice Water Bottle
Fully Automatic Water Bottle Filling Machine 10000 Bottles Per Hour PLC Control
Fully Automatic Drinking Water / Juice Filling Machine 4000BPH For Round PET Bottle
0.5-50TPH Reverse Osmosis Water Treatment Equipment Water Purifier Systems
Linear Type Auto 3 In 1 PET Bottle Water Filling Machine For Alcoholic / Beverage
Stainless Steel Water Treatment Systems Purification Equipment With RO UV Water Tank
Product Details
Auto Juice PET Bottle Blowing Machine , Blow Molding Equipment
Quick Detail:
1. Product: Automatic PET bottle blowing machine (2 cavities)
3. Main Material: SS304
4. Production capacity: 2000bph(500ml)
5. Usage: Fill pure/mineral/distilled water and so on
6. Dimension: 235x160x190cm
7. Warranty: 1year free
Automatic PET bottle blowing machine (2 cavity)
Description:
Advantages of blowing machine
1).High automatization
2).High intelligence: The machine can be controlled through touch screen and running status is shown on it.
3).High quanlity: Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed: 2000BPH (2-cavity)
5).No Contamination: Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost: Low consumption of electricity, air and water.
7).High Transparency: Easy maintenance, absolute safely, visual inspection, low noise.
Features
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: less than 0.2 percent.
Specifications:
| Main parameter: | ||
| Model | DY-6 | |
| Productivity | Depend on bottle design |
5000-5500PCS/H 1500ml carbonated |
| Product type | Body diameter | 20mm-100mm |
| Height | 50mm-350mm | |
| Neck diameter | 15mm-38mm | |
| Mold | Cavity | 6cavities |
| Mold thick | 200mm | |
| Mold | 800*800mm | |
| Main machine power | Electrical source power | 380v 3Phase /220v 3Phase 50/60HZ |
| Rated Power | 40kw | |
| Really use power | 20kw | |
| Cooling water | Cooling water | 20L/min |
| Size | L*W*H | 2808*1958*1920mm |
| Weight | 4500kg | |
| Auxiliary equipment(preform unscrambler) | L*W*H | 2000*950*2480mm |
| Weight | 250kg | |
| Resin available | PET | |
Components
Facebook
X
Pinterest
Linkedln