Delivery Time:10-15 work days
Certification:CE ROHS SGS
Easy Cleaning Thickness Car Interior Sound Deadening For Heat And Sound Insulation

WanTai is built to the highest standards in this industry using 100% butyl rubber with a layer of heat resistant aluminum. Butyl rubber is the same material high end speakers surround material is made out of. We use the highest quality pressure-sensitive self-adhesive to make your installation quick and easy. Our model has increased flexibility for an easier and more permanent installation! Our sound dampening product uses 4mil of pure grade aluminum! Most products on the market use 2mil. Our product will absorb sound better than the competition. If a product does not specify how much material is being used, you should be very cautious about it! Every manufacturer should know what they put into their products! Also, other products on the market such as WanTai for example use a mixture of asphalt in their products. They basically are manufacturing roofing material and calling it sound deadener. Their product will work OK, but not nearly as good as our China. WanTai is made of butyl rubber and aluminum which is the same as many of the more expensive brands out there that sell for twice our price.. We do not cheat our customers. We only make top quality product

Functions :
1, Release the structure transmission attenuation vibration energy
2, Decrease Vibration and Heat From the engine
3, Decrease Interior (speaker and car body), Engine, Exhaust Noise, and Vibration.
4, Reduce External noise (tires on the road, other cars, wind, etc)
5, Lessen the vibration of the structure shaking or the striking
6, Increase the value of your vehicle
7, Increase your car audio sound effect, make you better music!
8, Enjoyed you a Cool, Quiet and Comfortable ride

• Use for floor, door,trunk,
stereo enclosures, under dash,
inner firewall and etc

• Easy-to-install, very high-strength
adhesive butyl rubber

• Eliminate body/floor vibration

• Better audio sound quality

Installation:

1.Clean up the mounting surface, like the hood, trunk, floor, (for door and roof , need to remove the door panel, roof panel) with a quick-drying and residue-free solvent. Remove all dust, dirt, oil, moisture etc.

2.Use scissors, knife or die to cut the mat to the desired size and shape before removing the release liner.

( Note: work gloves should be used when handle foil backed material because the sharp edges when cut to different size)