Small Shrimps / Cattle / Catfish Feed Pellet Machine High Reliability
USD $ 800 - $6000 /Set
Min.Order:1 Set
Grass Pet Food Extruder Animal Feed Pellet Machine 15KW Motor Driven
Straw Bamboo Fuel Wood Pellet Machine With Automatic Lubricant Pump
Home Sawdust Wood Pellet Mill For Straw , Cotton Stalk , Rice Husk
110 - 140 kg / h Sawdust Wood Pelleting Machine For Cattle Feed
Model 1100 Disc Biomass Wood Chipper Machine With LowPowerConsumption
Charcoal Coal Briquette Making Machine With Square Shape 100 x 100 mm
Small Shrimps / Cattle / Catfish Feed Pellet Machine High Reliability
Introduction of the small floating fish feed pellet machine :
1) Fish Food Machine can make kinds of feed for different fish, such as food fish, catfish, shrimps, crab, etc. the fish pellet made by the machine can float on water more than 24 hours.
2) It apply to the preaching of the animal fodder so as to reduce loss of nutrition, advance the portend content.
3) It can also make many kinds of fodder for different kinds of animals.
4) Low energy consumption , high yield; simple operation, high reliability.
small floating fish feed pellet machine:
With different molds, the machine can produce different diameter food, such as 1.5mm, 2.5mm etc. So the food can meet different stage fish. The food can be floating 24 hours.
2. Parameter of the small floating fish feed pellet machine:
model |
capacity |
power |
the grain-size |
screw diameter |
PH52 |
50-60kg/h |
5.5+0.75kw |
1.2-6mm |
52mm |
PH65 |
80-100kg/h |
11+0.75kw |
1.2-6mm |
65mm |
PH75 |
140-160kg/h |
15+0.75kw |
1.2-10mm |
75mm |
PH95 |
260-300kg/h |
22+0.75kw |
1.2-10mm |
95mm |
3. Working principle of the small floating fish feed pellet machine:
There is no need to heat outside the machine, through the screw extruding of the raw material, produces heat during the rotary working process, and gathers heat in the airtight environment to reach ripening, during the high temperature ripening process, the starch and fiber of the raw material become swell, on the pressure-tight condition, spray up from the mold outlet through the high pressure produced by the regular rotating of the screw, after cutting by the forepart cutter which rotates regularly and high-speedily, the finished product will be shrunk and become small average ball.