Delivery Time:30 working days after received your payment
Certification:CE/ISO13485/ISO9001

 Floor Standing Hospital Autoclave With Sliding  Door For Operation Room

Specification:

    This Hospital sterilizer is configured for pre-vacuum sterilization of heat- and moisture-stable materials used in hospital, clinic, operation room and healthcare facilities. It can be  equipped with pre-vacuum, Steam Flush Pressure Pulse (SFPP), gravity, liquid, and daily air removal test cycles  which use, for example, a Bowie-Dick test pack to determine the effectiveness of removing air from a sterilizer chamber.
    Designed and manufactured according to ISO 9001, ISO 13485 system and latest moist steam  sterilizer related standards, which has the obvious advantage of low failure rate and easily operation  to ensure your satisfied using smoothly.
    Built-in steam generator of full SUS304 stainless steel with strong construction and long uptime is  controlled by the PLC intelligently avoiding your trouble of external steam supply. Controlled by  the sterilizer’s main PLC system, the steam generator, operation at the best status during the  sterilization, is not only lowing the failure rate, but saving your money every days as well.

Control System :

This Hospital Sterilizer features Mitsubishi PLC with enhanced functionality and user-friendly interface screen.

• Touch-screen with 800 x 480 display resolution

• Ink-on-paper impact printer,

• Help screens for programming and troubleshooting alarm conditions

• Automatic check of control program and cycle data maintains process integrity

• Individual digital data recorder for sterilization data storage.

Safety System:

Control senses when door seal is closed and sealed, preventing cycle start until a limit  switch signal is received. If control loses appropriate signal during cycle, alarm activates,  cycle  aborts and chamber safely vents with a controlled exhaust. Steam generator Float Switch activates alarm, aborts cycle and safely vents chamber with  a controlled exhaust if water lack is detected in the steam generator vessel. Pressure Relief Valve limits the amount of pressure buildup so that the rated pressure in  the vessel is not exceeded.

Steam Generator:

This Hospital Sterilizer equipped with an electric steam generator includes an automatic water-in, electric heating 

and drain controlled by PLC. 

Steam generator vessel of SUS304, electric heating element of SUS304 to ensure the  clean steam supply.

• Electrical - Controls 
220 Volt, 50/60 Hz, 1-phase, 1KVA

 Optional: 

220 Volt, 60 Hz, 1-phase, 1KVA or 

120 Volt, 50/60 Hz, 1-phase, 1KVA

• Electrical - Integral Steam Generator

380Volt, 50 Hz, 3-phase, 18KW

Optional:

208 Volt, 50/60 Hz, 3-phase, 18KW

240 Volt, 50/60 Hz, 3-phase, 18KW

380 Volt, 60 Hz, 3-phase, 18KW or

480 Volt, 50/60 Hz, 3-phase, 18KW

Parameters:

Model	MD-0.36V
Door type	Vertical sliding single door
Max working pressure	0.23Mpa
Working vacuum degree	<-0.086Mpa
Max working temperature	134℃
Chamber size	1000*600*600 mm(L*W*H)
External dimension	1350*1350*1800mm(L*W*H)
Net weight	750Kg
Utilities Supply
Electric power	AC380V, 50Hz, 3Ph/N/E,21KVA
Water	0.15---0.3MPa, Hardness <50ppm, pH Neutral, 85Kg/cycle
Compressed air	0.5～0.7Mpa, 10 liters/minute

Programs:

Test programs: Bowie & Dick test, vacuum test.

Working programs:  Multiple customizable programs for textiles, instruments, rubbers, culture  medium and liquids in unsealed bottles.

Main adjustable parameters:

  Sterilization temperature rage: at 105°C to 134°C

  Sterilization time rage: 0---99 minutes

  Vacuum times: 0---9 times

  Drying time: 0---99 minutes

Multiple adjustable parameters to ensure user’s customized programs are available, accurate  and perfect sterilization effect.