Delivery Time:7-15 working days after received your payment
Certification:CE,TRCU,ISO9001

Automatic Steam Jacketed Valves , Intelligent Pneumatic Diaphragm Control Valve

Pneumatic diaphragm intelligent jacketed single-seat control valve

YSIQ(D)10J Series of Intelligent Jacketed Insulation Control Valve mainly applied to the occasions of thermal insulation, full the heat medium into the gap between valve body and metal jacket to keep thermal insulation and prevent fluid crystallization occurs, as well as the increase of viscosity, which due to the temperature reduction.

ZM10 series multi-springs pneumatic reinforce actuator, makes the valve realize the conversion of normal close and normal open on site easily, the spring can be effectively protected from the corrosion to prolong the service life of actuator and convenient for customers operation. The actuator and the intelligent valve positioner are connected pipeless to strengthen the antisemitic performance,stability and precision adjustment, to meet to exactly control of the working conditions.

Working principle:

    The equipped smart positioner will convert to valve required settings when receive normal signal of electricity or signal of computer. Then the pneumatic actuator linear displacement will change to angular displacement by valve special connections, and tested by position transducer then feedback to microprocessor.

    The microprocessor will compare the actual valve feedback with original settings and tested if there is any deviation. It will output pulse width modulation command(PWM) to piezoelectric valve according to the the size and direction of deviation. The piezoelectric valve will regulate the input or exhaust gas under the control command.

Main Parts Materials                                                                Table 1

Item	Part Name	Material
1	Body	WCB	WC6	CF8	CF8M
2	Seat	304,316/Partial Stellite	316/Partial Stellite
3	Plug	Metal Sealing	304,316/Partial Stellite	316/Partial Stellite
Soft Sealing	304,316+Reinforced Teflon	316+Reinforced Teflon
4	Cage	304,316	316
5	Guide Sleeve/Silencing Cover	304,316	316
6	Stem	304,316	316
7	Bonnet	WCB	WC6	CF8	CF8M

*Above is the common materials,the specific grades take the contract as a standard.

Specification&Technical Parameter                                                   Table 2                          

Type	Pressure Balanced Low Noise
Nominal Diameter	DN40～DN400(1-1/2”～16”)
Nominal Pressure	PN16,25,40,64,100(150lb,300lb,600lb)
Flow Characteristic	Equal Percentage, Linear
Rangeability	50﹕1
Bonnet Form	Standard Type:Cast Steel :-20～250℃   Stainless Steel:-40～250℃
Low-Temp. Type:Cast Stainless Steel:-60～-100℃,-100～-200℃,-200～-250℃
Seat Leakage	ANSI Ⅳ,V

Main Performance Index                                                            Table 3

No.

Item

Standard Type

Fin-Extension Type, Low-Temp. Type