Hot-melt Road Marking paint is composed of petroleum resin, EVA, PE wax, pigments, etc. Under the room temperature, it is in the form of powder. When heated to 180-220 , it is like flow and there will be hard lacquer film if coated on the road. The mark has the characteristics of strong resistance. If the reflective glass beads are put on the mark in the process of construction, the reflective effect will be very well. Therefore, this paint is widely used on the highway and the city road. According to the environment, construction temperature and the reflective requirements, we will offer different materials Features of the Hot-melt Road Marking Paint 1. Strong adhesion: In order to improve the adhesion a special rubber elastomethe has been added to the paint; 2. Drying fast: It will take only 2 to 3 minutes for the road to become dry and open; 3. Good reflection. 4. Good anti-cracking ability. 5. Bright color: good weather resistance, exposure perennial does not change color. 6. High Coating Rate: small density, large volume, high spreading rate.