Certification:PTS,NCPP,GTS

Liquids and Intert Gases Push Fit Hand Valve Water Hose Connector

Description:

Faster Inline hand valve connector connect tubes at both end. Polyformaldehyde plastic body. Suitable for water and Liquide use. Handles pressures up to 145 psi (10 bar),bursting pressure is 435 psi(30 bar) an operating temperature range of -20 to +60 degrees C, and a vacuum capability of 750 mm Hg Meets  Can be mounted on a wall or adjacent surface using staples Full port flow for higher operating efficiency than standard port Inline valve for connecting two pipes going in the same direction Push-to-connect ends for tight seals

Applications:

Spe offer the widest range of water hose connector, push-fit fittings, and push in fittings.Push fit plastic fittings are used in various applications, including radiant heating system,drinks dispense, pure water applications, reverse osmosis system, and water purification system, among others.beyond water and food use, fittings can be used with air, gases,vacuum,and liquids.and all connections can be assembled and disassembled repeatedly. a broad of sizes covers a broad scope of applications

Competitive Advantage:

SPE ball valve has a Polyformaldehyde body for lighter weight than metal valves. This valve has NBR (nitrile butadiene rubber) wear compensation seals for high wear resistance. This valve has a full port for reduced friction; the inner diameter of the valve is the same as the inner diameter of the pipes it connects to enable maximum operating efficiency. This inline valve connects two tube going in the same direction using push-to-connect ends, and it vents through a port when the primary flow is closed. It is designed to work with polymer tubing with no tube preparation required for reduced installation time. This valve can be mounted on a wall or an adjacent surface using staples. This silicone free, light-weight, compact valve uses inch measurements, has automatic seat seal wear compensation for long-term reliability, and date coding for traceability. The manually-operated handle has a screwdriver slot for easier operation. It is used for vacuum operations and pneumatics, and in the semiconductor, packaging, and textile industries.

Warning

When tighting threaded fittings,use care nor to over-torque the fitting as this may damage the fitting and cause a leak or other failure.