Delivery Time:10-15 working days
Certification:CE, TUV

Bus Aircraft Motorcycle Paint Booth Prep Station With Galvanized Steel Roof

Features

1. Each unit with one 5.5kw fan for intake and exhaust.

2. Quality brand turbo fans, directly drive type.

3. Heating system option.

4. Rear side draft air flow.

5, Continue line with rail on floor option.

6, Led light and Scheider electric components.

7, Moveable infrared on the ceiling option.

8, Different job in different position at the same time.

9, PVC curtain between the station.

Advantage

Prep station used for making base coat, top coat, sanding and small painting, outside fresh air comes into the booth through the ceiling filter system, from the plenum, full down air flow comes out, and extraction from rear side directly through fibreglass filter and carbon filter, the air flow can be control by electric damper. Mount on the concrete floor, easy for installation and maintenance, the most importance things is the cost very low, highly cost effective.

Item	Detailed Specification
Inside dimension	6300×3450×2650 mm (L×W×H)
Outside dimension	7550×3550×3100mm (L×W×H)
Plenum dimension	6300×3450×450 mm (L×W×H)
Room body	Back side EPS wall panel, the other sides PVC curtain.
Light	Ceiling Lights: 8Units×4Pcs=32Pcs×36W, with LED, lighting boxes are powered coated.
Generator cabinet	Exhaust from back side, galvanized steel frame; white machine-made panel covered, filled with heat preservation material inside.
Intake and Exhaust system	1×5.5KW turbo fan, air capacity: 18000m3/h, with electric damper.
Purification system	Pre-filter, ceiling filter, fibreglass filter.
Roof	Galvanized steel
Control system	Fan switch, lighting switch, emergency stop.
Installs way	Hooked from roof by steel cable or supported by steel column.
Total power	6.7KW (Power supply 1×220V, 3×380V, 50HZ)