Product Details

SK series liquid ring type vacuum pump

Product Features

SK series liquid ring type vacuum pump and compressor is used to suction or compress air and other gas that is non-corrosive, unsolvable in water and with no solid powder, so that vacuum and pressure can be obtained in the sealed container. However, small amount of liquid is allowed in the suctioned gas

    sK liquid ring type vacuum pump and compressor is widely used in several sectors such as mechanical, petrochemical, pharmaceutical, food, sugar making and electronic industry. Since the air compression is operated under the same temperature, it won't easily lead to any danger, when the pump is suctioning or compressing any explosive gas. Therefore, the pump is widely used.

m3/min (kw) (r/min) (MPa) (mm)
Maximum -0.041MPa(-450mmHg) mmHg MPa
SK-1.5 1.5 1.35 -680 -0.091 3 4 1440 00.1 70 70
SK-3 3 2.8 -700 -0.093 5.5 7.5 1440 00.1 70 70
SK-6 6 5.4 -700 -0.093 11 15 1460 00.1 80 80
SK-12 12 10.8 -700 -0.093 18.5 30 970/980 00.1 80 80
SK-20 20 18 -700 -0.093 37 55 740 00.1 150 150
SK-30 30 27 -700 -0.093 55 75 740 00.1 150 150
SK-42 42 37.8 -700 -0.093 75 - 740 - 150 150
SK-60 60 54 -700 -0.093 90 - 590 - 250 250
SK-85 85 76.5 -700 -0.093 132 - 590 - 250 250
SK-120 120 108 -700 -0.093 185 - 490 - 300 250

Note:
 1. When the vacuum percentage range is 40% to 90%, or the pressure range is 0.05Mpa to 0.15Mpa, the gas suction and drainage will be subject to the amount of the supplied water amount and the crevice between the impeller and the side cover. If the flux is rather small, and the adjustment is not accurate enough, the gas suction and drainage tends to be smaller
 2. The value in the table is obtained under the following condition: water temperature is 15 air temperature is 20 relative humidity of the gas is 70 air pressure is 0.1013Mpa
 3. The performance difference in the table will not exceed 5%

You May Like

Find Similar Products By Category

You May Like

View More
Chat Now Contact Now