Copper Wire Winding coil winding machine Bunching Twisting Machine (FC-650B)

Specifications:

1. Technical paramenter

·  Wire diameter: 0.19~1.2mm

·  Swing diameter: 220mm

·  Operation station: 8

·  Winding head: 4

·  Max stack height: 65mm

·  Max stator OD: 120mm

·  Max RPM: 2500RPM

·  Air source: ≥0.5MPa

·  Power supply: 380V 50/60HZ 15KW

·  Weight:about 5000KG

·  Dimension:(L)2100*(W)1350*(H)2200mm

Description:

With high rotation speed, with constant tension from empty bobbin to full bobbin, with superior quality for twist wire.The machine is driven by synchronization strap. Only need to change capstan wheel to change the pitch. Easy to operate.

This machine has four winding heads and eight operation stations. High efficiency is its feature. The machine automatically put the coil into transfer former orderly, especially suitable for high production capacity requirement, high slot filling rate, small slot opening stator coil winding. Winding mode, such as auto skip, auto cutting and auto indexing could be completed at a time successively; parameter could be set in human-machine interface. Continuous/discontinues winding way and meets the 2 poles. 4 poles, 6 poles coils winding.

Applications:

It is applied to the twisting of above 7 PCS of bare copper wires, tinned wires, silver jacketed wires and enamelled wires and double twisting for core wires.

This machine is suitable for 2 poles. 4 poles, 6 poles coils winding.

winding machine is one simply semiautomatic winder which used for very thick wire of toroid coil, and very thick wire with big toroid core of coil. Like as some big power factor corrector inductos, power inductors, UPS inductor, And wire insulation film can be protected in good.

Competitive Advantage:

1. Easy to operate.
2. Need cut the required wire length before winding.

3. Easy to switch the winding fixture for different size core.
4. Operation with compressed air.
5. Spread wire by manual.