MTRJ Fiber Optic Connectors MTRJ Fiber Optic Connector is capable of terminating any 125um fiber, designed to terminate two fibers within a single connector, reduces the risk of operator error when inter-connecting equipment and distribution panels. The flexibility of the connector allows it to be used in short run local area networks as well as longer haul cabling using single mode fiber. The high density MT-RJ connector allows the termination of high fiber count backbone cables to be terminated in smaller distribution panels. Features: High quality ceramic components and Material End-face geometry requirement complies to Telcordia GR-326-CORE 100% tested on optical performance (Insertion Loss & Return Loss) Simplex, duplex and higher core densities 900 micron, 2mm, 3mm cable applicationsDetails: Connector FerruleCeramicAlignment SleeveCeramicConnector BodyUL 94V-0 rated Thermoplastic to meet standard flammability ratingsCrimp Insert/Crimp TubeNickel-Plated Brass/Thermoplastic Elastomer PolymerDust CapNylon or PVCStrain Relief BootFlame retardant (UL-Rated 94-V0) polymerConnector StyleSC, FC, ST, LC, MTRJ,PolishPC, UPC, APCCapillary Diameter Tolerance126 ± 0.5μm(Single Mode), 127 ± 0.5μm (Multimode)Ferrule Diameter2.5 ± 0.001mm(FC,SC,ST),1.25± 0.001mm (LC)Specifications:      ItemSingle modeMultimodePCUPCAPC62.5/12550/12550/125 10GInsert Loss/connector      (single Fiber)0.3dB Max. (0.2dB typ.)0.3dB Max. (0.2dB typ.)Return Loss≥45 dB≥50 dB≥60 dBN.AInsert Loss/MTRJ Connector0.5dB Max. (0.45dB typ.)0.5dB Max. (0.45dB typ.)Pull Strength≥98N≥98NOrdering Information: 1,Connector type : SC,LC,FC,ST,MTRJ,DIN,E2000 2,Polish: UPC ,PC,APC 3,Mode:Singlemode,Multimode 4,Fiber Count: Simplex or Duplex 5,Connector boot diameter: 0.9mm,2.0mm or 3.0mm Cusotmers can place order according above information ,if there is special request please feel free to contact with us : sales@springoptic.com .