Product Details

Delivery Time:3-5 days
Certification:CE,FCC,MSDS

80L Vertical Type Temperature Humidity Control Test Equipment For Plastic Metal

Specification:

Model	CZ-A1-80C
Internal Dimensions WxHxD (cm)	40x50x40
External Dimensions WxHxD (cm)	60x162x95
Temperature Range	-20°C~+100°C(150 °C )
Humidity Range	20%~98%R.H.
Analytic Accuracy/evenness degree of Temperature and Humidity	0.01°C; 0.1%R.H./ ±1.0°C; ± 3.0%R.H.
Control Accuracy/Temperature stabicity of Temperature and Humidity	± 1.0°C; ± 2.0 %R.H/ ±0.5°C
Temperature Rising/Falling Time	Approximately 3.0°C/minute; approximately1.0°C/minute
Inner and Outer Materials	cold-rolled steel paint the inner box is SUS 304# stainless steel .
Insulation Materia	high temperature resistant high density polyurethane rigidfoam insulation materials
Cooling System	Air cooling /single segment compressor (-20°C), air water cooling/double segment compressor
Protection Devices	Fuse-free switch, overloading protection switch for compressor, high and low voltage coolant protection switch, over-humidity and over-temperature protection switch, fuses, failure warning system
Accessories	Recorder (optional), watching window, 50mm testing hole, PL internal bulbs,partition plate, dry and wet ball gauze
control panel	LCD TEMI 880
Compressor	France \"Tecumseh\" Brand
Power	220VAC±10% 50/60Hz

Description :

Temperature humidity control test equipment is also called environment testing machine, used to test

various types of materials for their tolerances of heat, cold, dry, humidity.

Application :

Temperature humidity control test equipment is used for all types of electronic products, electric

appliance, and products from communication, instrument, automobile, plastic, metal, food, chemical,

building materials, medical and aerospace industries.

Corresponding standards:

1. GB2423.22－2002 test N : temperature change test method

2. GB2423.3-93(IEC68-2-3) test Ca: constant damp heat test method

3. GB2423.4-93(IEC68-2-30) test Db: alternating hot and humidity test method

4. GJB150.3A－2009 high temperature test method

5. GJB150.4A－2009 low temperature test method

6. GJB150.9A-2009 damp heat test method

7. GB2423.1-2008/IEC6008-2-1-2007 Electronic Electrician Product Environmental Test

Part 2: test method Test A: low temperature

8. GBT 2423.2-2008 Electronic Electrician Product Environmental Test

Part 2: test method Test B: high temperature

9. GBT 2423.4-2008/IEC6008-2-30:2005 alternating hot and humidity test method

10. GB-T5170.18-2005 Electronic Electrician Product Environmental Test basic parameter calibration

method for temp. /humidity combination loops test equipment

11. GB-T10586-2006 damp heat test chamber technical condition

12. GBT 10589-2008 low temperature test chamber technical condition

Features:

1. High texture appearance, the machine body is arc shape, and the surface is painted and uses the

plane without reaction handle which is safe and reliable and easy to operate.

2. Rectangular multi-layer glass view window is used to observer the test products in the testing. The

window with anti-sweet electric heater device can prevent condensation water droplets; the window

also has high brightness PL fluorescent lamp to keep the inside machine light.

3. The door\'s double insulated seal strip can effectively isolate internal temperature leakage.

4. The external water supply system is convenient for supplementing water to humidification barrel pot, and the water can recycle automatically.

5. Refrigeration and dehumidification system adopts French \"Taikang\" brand compressor, with the

advantages of energy saving, low noise, low energy consumption, and stable performance, and adopts

environmental protection refrigerant (R23, R40a).

6. Controller adopts imported LCD display screen which can simultaneously display measured value and

the set value, time, etc.

7. Con