Delivery Time:3-5 days
Certification:CE,FCC,MSDS

USB-Fiber Laser Control Card/Fiber laser machine /Laser Marking Card

Quick Detail:

Fiber laser marking card can be used to control the fiber laser machine to marking,engraving,cutting  on surface of material.Software EZCAD Support CO2,YAG,IPG,SPI and so on laser type. Work stable. Operation simple.Easy to learn.

USBLMC marking control card is developed specially for marking machine, it adopt USB interface form.  USBLMC marking control card is made up of two PCB board: Main-board and IO board. Main board and IO board are connected by two sockets which with 50 pins. The main boards are the same, the IO board is divided into three different kinds by application: Optic fiber  module  (IPG), common digital module, and common analog module. Among them, common digital module is  with a conversion board.

Description:

Support multi-card working pattern. One computer can control 8 sets of USBLMC at a time, makes and marks the control board to run side by side and operate. Different contents can be processed by 8 sets of control cards. Marking-on-fly

Flying encoder can be connected to do real-time liner speed checking for good result of  high speed 

marking

Extend axis (step motor / servo electrical motor) output

Can output two directions/pulse signals of channels to control step motor (or servo electrical  motor), applicable to pivot or join.

Start signal

Used when marking contents are the same and high speed is required. The Floor push can  connect to Start signal, or to the common input signal as well. If there are variables in marking  content, they have to be connected to the common input signal.

Compatible with USB2.0 / USB1.0

Applicable scope:

Laser Marking Laser Engraving Drilling circuit board with holes Cutting cloth Cutting paper Laser marking on metal

Function:

Fly marking  Ruler mark 4 kinds of Hatch Two axis control Multi-head  Vision mark

Specifications:

FEATURE

USBLMC marking control card uses 5V power.

Mark-on-fly:encoder can be connected to the board to measure the fly speed .

Multiple boards on 1 computer: One computer can control up to 8 control board to mark different  pattern simultaneously

Common digital input / output signal (TTL signal)　There are 10 routes input and 7 routes output  signal

Re Mark(cache contents repeat marking )signal:Used in the case of marking same content at high  speed

Laser Err signal will be active when there is fault in the laser Source ,Open-drained output.

Compatible with USB2.0 / USB1.0

CARD PARAMETER

Electrical Parameter

Power supply parameters: DC5V/3A

Connector: USB connector/DB connector

Signal: 10 routes input and 7 routes output signal

Precautions

Carefully check your application program before running it. Programming errors can cause a break  down of the system. In this case neither the laser nor the scan head can be controlled.

Protect the board from humidity, dust, corrosive vapors and mechanical stress.

For storage and operation, avoid electromagnetic fields and static electricity.  These can damage the electronics on the product. For storage, always use the anti-static bag.

The allowed operating temperature range is 25℃ ± 10℃.

The storage temperature should be between –20℃ and +60℃.

ACCESSORIES
USB cable	DB25 male/female socket
DB9 male/female socket	Dongle
DB15 male/female socket	CD

Competitive Advantage:

Work stable,operation simple,easy to learn,famous software EZCAD,low cost,USB connection.