Lubricating oil purifier, hydraulic oil purifier used in:
1, Its mainly used in hydraulic oil recycling and machinery oil purification etc. which include more impurities in the oil.
2, can separate the water, gas, impurity. Increase the flash point, viscocity.
Feature:
1. The lubricating oil purfiier used strong demulsifying capability, which could separate the large amount of water from oil and the minimal amount of water from oil.
2. lubricant oil purifier has FH rectangle filtration system of deep and high precision to remove the iron flake, dust and impurities.
3. Tongruis technology of high macular of H,P,M material.
4. Envirnment friendly.
5, Power cost less.
6, Strong and stable.
7, With the engineer installation.
8, We can take the special order as the customer need.
Working principle
When the oil purification starts, firstly contaminated oil enter into heater, secondly flowed into pre-filter under the difference pressure, in which the large impurities are removed. Thirdly oil goes into intermediate filter. Fourthly oil flow into water separator, the water separator adopts a special skill which changes the change the impaction of oil and water
to speed up trace water and coagulate big water which is separated from oil and stored in water content. After that, oil passes through the fine filter and fine particles of matters is
removed during the process. finally oil flows into vacuum pump which use stereo-evaporation removing residual trace of water and steam is condensed in the condenser or expelled out by the vacuum system. the oil was transported out by oil pump. The purification process has finished.