Delivery Time:70 days
Certification:CE

Color Plate / Galvanized Sheet Roof Panel Roll Forming Machine 0.4mm - 0.8mm

Quick Detail:

Composition

This roof sheet roll forming machine consists of several parts, as listed below.
 

1. 5T decoiler
2. roll forming machine
3. Hydraulic shear
4. Hydraulic station
5. PLC control cabinet
6. run out table

Working process:

Passive decoiling → guided material feeding → roll forming → cut-to-length → run out

Description:

Roof Panel Roll Forming Machine

The end product of this roof panel roll forming machine, namely roof panel, has found a lot of applications around the world. For example, it could be used to make the roofs for workshop, warehouse, hangar, gymnasium, theatre, exhibition hall, engine house as well as many other industrial and civilian buildings.

Common Features

1. The feeding widths are standard values including 1000mm, 1200mm and 1250mm. So, steel coils bought on the market could be processed by this machine directly, indicating that slitting is not necessary. In this way, the steel coil is fully utilized without any waste.

2. The finished roof panel is characterized by bright color, easy connection and convenient maintenance. The panel has reinforcing ribs, and corrugation is avoided during production. In addition, its mechanical strength meets the requirement of general use.

3. The rib height of the finished panel is not too high, so it is not very hard for us to manufacture this roll forming machine, and the machine is available at a reasonable price.

4. This product could be customized on the basis of customer\'s requirements and relevant drawings.

Roof panels made by this GWC25-205-820 roof panel roll forming machine are extremely popular on the market because of the high utilization rate, low depth (the height from the top of a crest to the bottom of a trough) and the cost-effective performance.

Applications:

workshop warehouse hangar gymnasium theatre exhibition hall engine house industrial buiding civilian buiding

Specifications

Model	GWC25-205-820/1025	Note
Applicable material	Color plate, galvanized sheet, galvalume plate and aluminum sheet	This machine is customizable upon each customer\'s requirements and the characteristics of processed material.
Feeding width	1000mm/1200mm
Processing thickness	0.4-0.8mm
Roller material	45# steel coated with hard chrome
Main motor power / hydraulic station power	3kW / 3kW	These parameters can be set according to the required production capacity.
Forming passes	18
Forming speed	5-15m/minute
Machine dimensions	9.5×1.3×1.2m
Machine weight	7T

Competitive Advantage:

1. This is a dual-use machine because one pitch could be added, making it into GWC25-205-1025 type and the feeding width is adjusted to 1200mm.

2. This roof panel roll forming machine is a very mature product, and there is no need to redesign it, thereby greatly reducing the production cycle.