Delivery Time:21days per container
Certification:ISO9001/KEMA

36KV 10KA Polymeric-housed Thunder Lightning Arrester

Description:

Metal Oxide Surge Arresters can be applied to a variety of systems including substation equipment, AC-DC converters, railway power system and power distribution units ranging from 0.25kV to 765kV systems. These surge arresters demonstrate excellent protection properties. surge arrester is a device to protect electrical equipment from over-voltage transients caused by external (lightning) or internal (switching) events.

Specifications:

Type	YH10W5-36/98
Rated voltage---------kV	36
MOCV ----------------kV	29
Nominal Current-------kV	10
Residual voltage of steep impulse----at 5kA(kV)	106
8/20µS Residual voltage of lightning impulse current kV(Peak value)-----at 5kA(kV)	98
Residual voltage of switching impulse current kV (peak value)----at 1kA (kV)	75
1mA D.C reference voltage (kV)	51
Line discharge level	1
2mS long duration impulse current A	400
4/10µS High current impulse kA	100
Lightning impulse withstand kV	200
Power frequency voltage withstand(dry/wet)kV	70
0.1S TOV--------------kV	43.2
1S TOV----------------kV	41.4
10S TOV---------------kV	39.6
1200S TOV-------------kV	36
Creepage distance ----mm	1148
Material employed in series non-linear resistor	Zinc Oxide

Note:

1 Applicable stardand:IEC,ANSI,GB and other international standard

2 Normal colour of the surge arrester: red, gray and brown.

3 Special design according customer’s requirement.