Delivery Time:15 working days after received your payment
Certification:ISO9001/WQA/FDA/SGS

Industry 10 inch Polypropylene 50 Micron Filter Cartridge for Filtration Equipment

General Description:

The DLM series PP pleated filter cartridge deliver high efficiency and consistent filtration of fluids in a wide 

range of critical applications. They are constructed of pleated melt blown filter media that provides removal of

 particles from 0.1 to 50um. The high surface area ensures long life and low initial pressure drops. All cartridge

 hardware components are made from high purity polypropylene material for use in critical process 

applications. These cartridges are manufactured and assembled in a clean room environment to minimize 

the possibility of contamination. M-Series filter cartridges are available in a wide range of configurations to 

fit most commercially available filter housings. 

Specifications:

Outside Diameter	2.7\'\'(69mm)
Length	9.75\'\',10\'\',20\'\',30\'\',40\'\'
Filter media	PP
Support Layer/Cage/Core/ End caps	Polypropylene (PP)
Seal Material	Silicone,EPDM,NBR,Vilton,Teflon,E-FKM
Removal Rating	0.1um,0.22um,0.45um,1um,3um,5um,10um,20um,50um,
Maximum Operating Temperature	80°C
Maximum Differential Pressure	4.0Bar@25°C
Maximum Differential Pressure(Reverse Direction)	2.0Bar,25°C
Maximum temperature sterilization	5times, 20minutes cycles at 120°C

Features:

-- Excellent performance of chemical compatibility
-- Hydrophillc membrane with high flow
-- Non-fiber releasing according to pharmaceutics and food industry requirements
-- Experiencing 100% integrity tested
-- Flushed with ultrapure water

-- FDA compliance material

Applications:

    Pharmaceutics
    Food and beverage

    Oil & Gas 

    Microelectronics
    Chemical industry

    Prefiltration for RO
    Semiconductor

    Paints & coating

Cosmetics

    Photographic solution

    Plating solution