Delivery Time:10 working days after received your payment
Certification:ARI ,CE，ISO9001,ISO14001,OHSAS18001，CRAA,CQC

EKCC 040A-EKCC 050A low static pressure central duct type air conditioner unit
 
 
Specifications:

Model	Indoor unit	EKCC040A	EKCC050A
Outdoor unit	EKAA040AC	EKAA040ARC	EKAA050AC	EKAA050ARC
Nominal cooling capacity	W	10600	10600	12000	12000
Nominal heating capacity	W	--	12600	--	14500
Rated input power	Cooling	W	3550	3600	4410	4400
Heating	W	--	3900	--	4800
Rated current	Cooling	A	6.6	6.6	7.5	7.6
Heating	A	--	7	--	8.4
EER	W/W	2.99	2.94	2.72	2.73
Energy Efficiency Rating		2	2	2	2
Indoor unit	Air flow	m3/h	1900	1900
External static pressure	Pa	50(15/30/70)
Indoor unit weight	kg	39	39
Noise (high/medium/low)	dB(A)	46/44/42	46/44/42
Length x width x height	mm	1635×480×248
Outdoor unit	Noise	dB(A)	61		61
Outdoor unit weight		kg	105	112	105	112
Length x width x height		mm	970×345×1255
Power supply		380V/3N~/50Hz
Connector size	Liquid pipe external diameter φmm (in.)	φmm(in.)	9.52(3/8)		9.52(3/8)
Gas pipe external diameter φmm (in.)	φmm(in.)	19.05(3/4)	19.05(3/4)
Water drainage pipe		R3/4
Shell of exposed hoisting unit				EKCC040E	EKCC050E
Shell dimensions (length x width x height)	mm	1827×557×297	2087×557×297

 
Note:
■ The GB 19576-2004 EER standard is applied.
■ The nominal cooling capacity is measured under the following conditions: The indoor dry/wet bulb reads 27/19 °C and the outdoor dry bulb
reads 35 °C.
■ The nominal heating capacity is measured under the following conditions: The indoor dry/wet bulb reads 20/15 °C and the outdoor dry/wet
bulb reads 7/6 °C.
■ The preceding performance data is based on the condition that the connection pipe between indoor and outdoor units is 5 m.
■ The air amount of the indoor unit is the air amount at high wind speed under standard static pressure.
■ The value in brackets for static pressure outside the unit is an optional value for static pressure. When an external hot water coil box is
used, the air resistance of the hot water coil box needs to be deducted from the original static pressure outside the unit to obtain the static
pressure value outside the unit.
■ The noise value for the indoor unit is measured under standard static pressure outside the unit in a semi-anechoic room without air return
plenum. The noise increases by about 5 dB(A) in the case of downward air return.
■ An indoor unit with an external electric heater box or external hot water coil box is equal to a standard unit.
■ For details about on-site power distribution and wiring for unit installation, see the nameplate or installation manual of the unit.