The conical roller bearing is mainly used for bearing a radially and axially combined load giving priority to the radial load. It is the usual case that the bearing is not suitable for bearing an axial load independently. Regarding the design of the conical roller bearing, the vertexes of the conical surfaces of the inner ring race surface, the outer ring race surface and the roller rolling surface are intercrossed at one point on the central line of the bearing. Besides meter series of products, the company also provides English series of products. The conical roller bearing is suitable for bearing a heavy load and an impact load. Besides a single row bearing, the conical roller bearing can also be a double row bearing, a back to back duplex bearing and a four-row bearing. The cage of the conical roller bearing is usually a stamping cage. Features: 1, Series 30202-30226, 30302-30320, 32004-32024, 32204-32228, 32303-32320, 32303-32320, 33010-33022, 33109-33118, 33205-33220, inch size also available. 2, High-speed rotation, low-friction torque, low vibration and low noise. 3, Material: chrome steel GCR15 and high Carbon Steel GCR11 4. Tepered roller bearings are for Industrial Use and Auto Parts. The taper angles allow the bearing to handle a combination of radial and thrust loads. The steeper the cup angle, the greater the ability of the bearing to handle thrust loads.