16 W Video Camera Lighting Equipment Rectangle Music Video Lighting
Negotiable /Piece
Min.Order:1 Piece
Yuyao Lishuai Film & Television Equipment Co., Ltd.
Sturdy Photo Lighting Studio LED Edge lighting 75 Degree Beam Angle
High Brightness 3 Light LED Studio Lighting Kit For Video Room
Ultra Bright Single Color LED Video Light Kits , Photo Light Kits
Daylight Pro FlapJack LED Edge Light LED Video Lights Rectangle Ultrathin
High Intensity LED Photo Studio Lights Kit for Photography Studio 100W
High Illumination LED Studio Lights For Video Lighting LED TV Studio Lighting
16 W Video Camera Lighting Equipment Rectangle Music Video Lighting
Product Specifications
Model Number | C-218A |
Power | 16 W |
Voltage | DC7.4-14.8V |
Demension | 284 x 104 x 46 mm |
Color termperature |
5600±300K or 3200K±200K for choice |
Illuminance |
770Lux/0.5m 218Lux/m |
Battery life time | Charge and Discharge for approx. 500 times |
Continuous working time | Approx 2 hrs |
Battery Recharging Time | Approx 4-5 hrs |
Material | Aluminum alloy |
What\'s Includied
1 x LED C-218A LED Edge Light
1 x 4400 mAh battery
1 x Battery charger
1 x 12V 2A AC charger adapter
1 x Ball head
1 x Carrying case
Product Characteristics
Operation
1. Install the battery onto the light.Turn on the power & brightness dimming kob and light works.
2. The right side of LCD shows the battery level .
Four columns: 75%-100%
Three columns: 50%-75%
Two columns: 25%-50%
One column: 10%-250%
No colimn: 10% or less
3. Pls adjust the brightness (10%-100%) of C-218A through the power & brightness dimming knob.
4. When the colum on the LCD flicks, it means the battery runs out, pls press the installation and uninstallation button to take off the battery. It takes 4-5hrs to recharge it.
Cautions:
1. It is no need to replace the LED bulbs in normal use.Please do not disassemble the light or solder the LED bulbs by the non-professionals.
2. Please do take off the batteries when in storage.
3. Please do not block the louvers,or it may seriously influence LEDs\' effect and lifetime.
4. The charger adapter is used for battery charging only.Please do not use on the light directly.
5. Please do discharge and recharge the battery at least once for every month if it is not in use.
6. It is not allowed to drop or impact the light to avoid fire.
7. It is not allowed to short circuit the battery,or it may seriously damage the battery or cause a fire.
8. It is not allowed to throw the battery into fire.
Warranty:
The LED light is guaranteed for 12 months.
The battery is guaranteed to be charged and discharged for 500 times.