Product Details

The QM/QF series of electric valve actuators are used in heating, ventilation, and air-conditioning (HVAC) applications. The QM series of electric valve actuators are modulating control actuators used with controls that provide an analog output of 0 to 10Vdc, 2 to 10Vdc or 4-20mA. The internal selector plug can be used to reverse the direction of action. The QF series of electric valve actuators are controlled by an on/off output.

740)this.width=740" border=undefined>740)this.width=740" border=undefined>

FEATURES

l Low power consumption

l Position feedback by signal

l Direct/reverse acting

l 4-20mA/0-10V/2-10V choice

l Maintenance free

l Quick and easy installation

l No separate linkage required

l Accurate valve positioning

l Indicator Continuous Position Indicator

l Manual Override Non-clutch design

l Gear Permanently lubricated and self locking

l Stall Protection Built-in thermal protection

TECHNICAL DATA:

VALVE
Flow media	Cold and hot water, water with max. 50% volume of glycol
Temperature of medium	-10°C.. +100°C
Rated pressure	1600 / 2760kPa
Leakage rate	Air bubble-tight (Bo 1, DIN 3230)
Closing pressure	1000kPa
Size	DN25-DN100
Material	Body Cast copper or Stainless Steel ,Shaft Stainless Steel,
Actuator
Actuator	QF/QM
Output torque	10, 16, 25, 40N.m
Power supply	AC220V or AC/DC24V
Run time	About 120S
Operating power	5VA
Output angle	90°± 3°
ON/OFF control signal	1 wire or 2 wire control
Control signal	4~20mA, 1~5V, or 0(2)~10V
Feedback signal	DC0 -10V
Installation position	Upright to horizontal（No upset）
Protection class	IP54
Ambient conditions	- 10°C. to. +55°C 0..90% RH
Weight	1kg
Material	Flame-resistant Abs