Bitumen Corrosion Protection Waterproof Duct Tape / Waterproofing Marine Tapes
Negotiable /Set
Min.Order:1 Set
Jining Xunda Pipe Coating Materials Company
Corrosion Protection Pipelines PVC Pipe Wrap Tape with Butyl Rubber / Bitumen Adhesive
Adhesive PVC Pipe Wrapping Tape / Pipe Insulation Wrap Tape Anti Rust and Water Resistance
Gas Water Oil Pipeline PVC Wrapping Tape for Steel Pipe Corrosion Resistant Coating
Polyethylene PVC Pipe Wrapping Tape Roll for Underground Pipeline Anticorrosive Protection
Eco-friendly Anti Rust PVC Pipe Wrap Tape Roll for Pipe Wrapping Coating Material
Self Adhesive PVC Anti Corrosion Pipe Wrap Tape for Underground Pipeline Corrosion Protection
Black Color 1.2mm Thick 200mm Wide Corrosion Protection Marine Tape
Anti-corrosion marine tape uses
For long life corrosion protection , sealing and waterproofing of subsea pipelines, risers and pilings in the offshore envionments of splash and inter -tidal zones where areas are exposed to waves, spray of seawater and atmosphere with high concentration of salt , oxygen and temperature variation.
Anti-corrosion marine tape application
This kinds of tape can be applied by machine or by hand, minimal tension is required to achieve intimate contact between pipe and coating.
Features:
Excellent adhesion to pipe and self
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
Anti-corrosion physical properties
Physical Properties |
Test Method |
Typical Value |
Total thickness |
ASTM D 1000 |
1.2mm |
Width |
---- |
50 -800 mm |
Length |
---- |
10 -60 m |
Backing color |
---- |
Black |
Breaking strength |
ASTM D 1000 |
35 N/cm |
Peel Adhesion to primed steel pipe |
ASTM D 1000 |
35 N/cm |
Elongation |
ASTM D 1000 |
200% |
Tear strength |
ASTM D 1004 |
12 N |
Cathodic Disbandment |
ASTM G8 |
0.25 in radius 6.4 |
Impact resistance |
ASTM D G14 |
3 Nm |
Dielectric Strength |
ASTM D 1000 |
36 Kv |
Volume Resistivity |
ASTM D 257 |
2.2x1012 ohm.cm |
Water Absorption |
ASTM D570 |
0.1% |
Water Vapour Transmission Rate (24h) |
ASTM F1249 |
0.1g/100sq mm/24h |
Application Temperature |
---- |
-10 ℃-80℃ |
About Us
Xunda Groups:Jining Xunda Pipe Coating Materials CO.,Ltd
Shandong Xunda Science & Technology CO.,Ltd
Shandong Xunda Anticorrosion Heat-Shirnkable Technology CO.,Ltd
We are the most largest manufacturers of Polyethylene Tape for the Corrosion Control of pipelines and specialty applications. A joint-stock enterprise, possessing a gross investment of RMB 42 million, registered capital of RMB 10 million.
A Global company supplying Polyethylene Coating Systems to the corrosion industry within the oil, gas and water pipeline construction industry for both onshore and offshore applications. A manufacturer of standard and specialty products. High-quality anti-corrosion systems providing anti-corrosion solutions for oil pipelines, natural gas, chemicals and water transmission and distribution pipelines, etc. Global supplier of PE corrosion system for metallic pipelines