1. The Trespa is composed of 30% wood fiber thermosetting resin and 70% by high temperature high pressure polymerization, its structure is uniform and compact, so any point of the board is very strong.

2. The surface after electron beam curing (EBC) technology processing, and coated with a transparent finish, a dense non porous structure, erosion can resist many corrosive chemicals. If within 24 hours cleaning, table will not leave any traces

3. The Trespa inner core is black, white, and brown. Color, pattern, texture of the expressive force of the surface is quite rich, so it can be used for outdoor and indoor building materials with corresponding strength requirements and appearance requirements.

4. The core material uses its patented core material dry foam technology makes the internal structure of plate restrict each other, and very difficult to warp.

5. The Trespa shock absorption capacity and special manufacturing process to make the seismic has certain power.

The Wear

surface

according to the BS EN 438-2/91 experiment prove Trespa has a surface wear resistance is strong, especially suitable for the use of high frequency and require frequent cleaning in place

Scratch Resistant

moment

surface structure and durability of special which has excellent resistance, even in the use of high load, the plate can also keep the appearance for a long time

Easy

To

clean

surface does not absorb dust density without holes; because of the ability of chemical corrosion resistance good, so it can be used for general cleaning agents or strong corrosive disinfectant for cleaning can also use organic solvent to remove graffiti marks. This color is no effect on the plate

Good Resistance

To Chemical

attack

such as acetone, xylen and other organic solvents and similar substances have a strong resistance, sheet also disinfectant resistant, chemical cleaning agents, fruit juice and dye erosion, have no effect on the surface and performance

Moisture

resistance

no bad influence in damp environment, also is not affected by weather, mildew, and corrosion

Impact

resistance

strengthening of solid material and melamine resin, given the extraordinary impact resistance of panel

Fire

resistance

burning cigarette contact surface and without damage, the plate will not fire or shedding, performance and hardwood is same, in the fire will not melt, dripping, explosion, can keep for a long time stability

Anti-static

according to DIN 51953 and DIN 53482, Trespa is designed as an antistatic material

Radiation

not by X ray through, so also with the medical department

Environmental protection

the sheet I expected to be like ordinary building materials and waste disposal or use it. If the use of industrial incinerator (temperature greater than 720 DEG C), does not release any toxic and harmful gases, can regain energy.

Solar irradiation did not cause discoloration and fading