Delivery Time:60 days
Certification:CE、ISO9001

Lubricating / Light Diesel Centrifuge Oil Water Separator Stationary Centripetal Pumps

Product description:

 The marine separator is mainly used for cleaning up the moisture and mechanical impurity in the fuel ( Light diesel oil, heavy diesel oil, fuel oil) and lubricating oil of ships and diesel engine, which is good to reduce the abrasion and prolong its service-life. The heavy diesel oil is separated by separator can replace the light diesel oil for using so that reduce the cost of production greatly.

The design, manufacture and inspect are accord with GB/T5745-2002 << Marine Disk Separator>>. Stable operation, the vibration is much lower than the national standard value. All materials are made of stainless steel, so effectively reduce the corrosion of separation materials.

Application:

 The marine separator is mainly used for cleaning up the moisture and mechanical impurity in the fuel ( Light diesel oil, heavy diesel oil, fuel oil) and lubricating oil of ships and diesel engine

Product competitive advantage:

1, There are stationary centripetal pumps for heavy phase and light phase output. Separated heavy phase and light phase are outputted respectively by the large and small centripetal pumps which on the top of the drum.

2, This series of separator outfits various specific gravity rings with different diameter, which can be selected and used according to the density and volume of the materials.

3, It has backpressure regulating valve. Separating effect can be regulated by regulating backpressure.

Product Specifications:

Model	Rated Treatment  capacity (L/h)	Inlet pressure (Mpa)	Outlet  pressure  (Mpa)	Suck Journey  of Sump Pump	Outlet pressure  of sump pump	Motor (KW)
KYDH206SD-23	3200	≤0.05	≥0.2	≥4	≥0.2	5.5

Introduction of Company:

Juneng Group has set-up a 1st class in-house laboratory for chemical composition analysis, metallographic analysis, spectrum analysis, performance analysis, radiographic inspection, magnetism inspection, ultra-sonic inspection and etc. This is to imply with the latest advance instrumentations and rigorous working attitude to ensure every part of product is stable and reliable.