Fote PE and PEX Series Large Sandstone Crushing Equipment---Jaw Crusher
USD $1285 - $250000 /Meter
Min.Order:1 Meter
Feed Size:120 - 1500 mm
Processing Capacity:1 - 2200 t/h
Processible Materials:Limestone, granite, pebbles, cobble, iron ore, basalt and all kinds of hard and soft ores with compressive strength not higher than 320 Mpa.
Application Range:Quarry, coal mining, mines mining, desulfurization in power plant, quartz sand, concrete mixing station, etc.
Feed Size:120 - 1500 mm
Processing Capacity:1 - 2200 t/h
Processible Materials:Limestone, granite, pebbles, cobble, iron ore, basalt and all kinds of hard and soft ores with compressive strength not higher than 320 Mpa.
Jaw crusher introduction:
Jaw crusher is the vital equipment in crushing industry. The highest compressive strength of the crushing materials is 320Mpa.
Jaw crusher is widely used in crushing the medium particle size materials of varieties of minerals and large materials. And it is widely used in mining, smelting, building material, highway, railway, water conservancy and chemical industry and other industries. Compared with similar models, its high yield, low energy consumption, reliable structure, easy operation and maintenance made it the most preferred rock crushing equipment.
Jaw crusher can be classified into large jaw crusher, small large jaw crusher and so on. Fote is one of the mini jaw crusher manufacturers in China. Also, Fote Machinery is one of the stone PE PEX jaw crusher suppliers. The small jaw crusher price is quite low and the quality is quite high.
Jaw crusher features:
1. The crushing chamber is deep and with no dead zone. Improve feeding capacity and output.
2. Large crushing ratio, uniform particle size.
3. Easy maintenance.
4. Simple structure, reliable operation and low operating costs.
5. Low power consumption, energy saving.
Jaw Crusher Working Principle:
1. The dynamic jaw moving from side to side is hung on the mandrel. When the eccentric shaft is turning, its connecting rod moves up and down, which also drives the two thrust plates to do the same movement. Then the dynamic jaw moves from side to side to realize crushing and unloading.
2. The jaw crusher adopts crank link mechanism. Although the dynamic jaw bears great broken counter-force and the eccentric shaft and the connecting rod bears little stress, industrial enterprises usually make large sized machine and middle sized to crush hard materials.
3. Additionally, every moving track of the dynamic jaw is an arc with the mandrel as its center. The circular arc radius equals the distance from the point to the axis with the upper arc being smaller and the lower arc bigger. The crushing efficiency of the jaw crusher is quite high and the crushing ratio is /products/p-68.html
Model | Feed opening (mm) | Max.feeding size (mm) | Adjusting range of discharge opening (mm) | Processing capacity (t/h) | Rotation speed of eccentric shaft (r/min) | Motor power (kw) | Total weight (t) | Dimensions (L×W×H) (mm) |
PE-150×250 | 150×250 | 125 | 10-40 | 1-3 | 250 | 5.5 | 0.8 | 720×660×850 |
PE-200×300 | 200×300 | 180 | 15-50 | 2-6 | 260 | 7.5 | 1.2 | 910×750×990 |
PE-200×350 | 200×350 | 180 | 18-70 | 3-10 | 260 | 11 | 1.5 | 1000×870×990 |
PE-250×400 | 250×400 | 210 | 20-60 | 5-20 | 300 | 15 | 2.8 | 1300×1090×1270 |
PE-400×600 | 400×600 | 340 | 40-100 | 16-60 | 275 | 30 | 7 | 1730×1730×1630 |
PE-500×750 | 500×750 | 425 | 50-100 | 40-110 | 275 | 55 | 12 | 1980×2080×1870 |
PE-600×750 | 600×750 | 500 | 150-200 | 80-240 | 275 | 55 | 15.8 | 2070×2000×1920 |
PE-600×900 | 600×900 | 500 | 65-160 | 50-180 | 250 | 55 | 17 | 2190×2206×2300 |
PE-750×1060 | 750×1060 | 630 | 80-140 | 110-320 | 250 | 110 | 29 | 2660×2430×2800 |
PE-800×1060 | 800×1060 | 640 | 130-190 | 130-330 | 250 | 110 | 29.8 | 2710×2430×2800 |
PE-830×1060 | 830×1060 | 650 | 160-220 | 150-336 | 250 | 110 | 30.7 | 2740×2430×2800 |
PE-870×1060 | 870×1060 | 660 | 200-260 | 190-336 | 250 | 110 | 31.5 | 2810×2430×280 |