Detailed information of SHJ series Twin-screw Extruder:   1.To meet different process requirements and applications Ruiya recently designed and provided high torque extruder series C(n is less than 500 r/min , T/A is greater than 8, ) and high speed & high torque extruder series D( n is greater than 600 r/min, T/A is greater than 8,) The newly designed torque distribution system, high-precision grinding of hardened gear teeth, imported high quality key bearings , and the interlocking of lubrication system are among the reasons for the good reliability of RUIYA's products.   2.Metering feeders are equipped with single screw , twin screws(both intermeshing and non-intermeshing), or spring(s) to meet different flow properties of bulk particulates . Besides the standard volumetric metering feeders, the loss-in-weight feeder with accuracy as high as 0.5 % are also available.   3.Granulating system includes water-trough strand pelletizing , air-cooling strand pelletizing, air-cooling die face cutting, water-ring die-face cutting, eccentric hot face cutting with special cooling, and underwater palletizing, Our engineers will recommend you with the best suitable way of granulating according to your material characteristics and process requirements.   4.For most applications of SHJ series Twin-screw Extruder, standard nitrated steel is used for barrels and screw elements. For applications with particular requirements, high corrosion-resistant and high wear-resistant materials of construction with special heat treatments are also provided for our customers to choose.   5.The key components in the Twin-screw Extruder are all imported very reliable instruments. Simulating control panel, PLC control, and PCC control are also provided upon request besides the standard control mode.   6.Due to its low vibration and low noise level, the main extruder can be installed on most solid grounds with no need for any special base.