Product Details
CX-105 is a multipurpose meter which enables to make different kinds of measurements depending on the type of the chosen head. Complete set of heads enables following measurements: pH, mV, redox potential (ORP), conductivity, salinity, dissolved oxygen in water in mg/l or %, humidity with possibility of determining the dew point, temperature of the surface and temperature of liquids or air
The meter cooperates with following heads:
- GP-105 - for pH and temperature measurement in water with low deposit content;
- GP-105s - for pH and temperature measurements in waste water or other viscous samples;
- GR-105k - for redox potential and temperature measurement, electrode with cable;
- GC-105 - for conductivity, salinity and temperature measurement;
- GO-105 - for oxygen dissolved in water, in % or mg/l and temperature measurements;
- GT-105 - for accurate temperature measurement, without cable. Parameters of temperature measurement as for PT-105;
- GT-105k - for accurate temperature measurement, probe with cable. Parameters of temperature measurement as for PT-105;
- GH-105 - for humidity and dew point measurements, sensor without cable;
- GH-105k - for humidity and dew point measurements, sensor with cable
- GH-105p - for humidity and dew point measurements, sensor without cable but with chinch connector for surface temperature
probe, what enables to decide whether painting on the surface in existing conditions is advisable.
• The user can freely choose the heads s/he needs. Switching the heads doesn’t require calibration – the electronic calibration
data is stored in the head.
• Used for field work.
• Size of a tester, accuracy of a laboratory meter.
• pH calibration in 1 to 3 points.
• Automatic detection of the buffer solutions 4.00, 7.00, 9.00 pH; or optionally 4.00, 7.00, 10.00 pH.
• Automatic temperature compensation.
• In the conductivity measurement mode 5 sub-ranges switched automatically.
• Wide measuring range in conductivity mode (up to 100 mS/cm) enables using the meter for measurements in pure water, waste
water or in sea water.
• Salinity measurement in range up to 60 g/l converted to NaCl.
• In the conductivity measuring mode possibility of calibration by introducing the constant K of head or in a standard solution.
• Oxygen measurement in % or in mg/l, possibility of introducing a correction connected with the salinity of the sample.
• In oxygen measurement mode 1 point calibration possible (in 100% of saturation(in air).
• Separate head for temperature measurements enables measurements up to:
- 150 °C with 3 cm probe without cable;
- 200 °C with12 cm probe without cable;
- 400 °C with every probe equipped with cable;
• Accuracy of temperature measurement depends on the kind of connected probe.
• Fully waterproof housing, floats if dropped in the water.
• Powered by 3 x LR44 batteries
• Long-lasting work on one battery set.
• Automatic switch off function to protect the batteries against discharging.
Main Products: Sell instrument and meters , goods imports and exports , technological imports and exports , agency
Business Type: Trading Company
China
Facebook
X
Pinterest
Linkedln