Multi-function water quality monitor (COD, ammonia nitrogen, total phosphorus, chlorine, turbidity) with software
Negotiable /Piece
Min.Order:1 Piece
Including COD, ammonia nitrogen, total phosphorus, chlorine, turbidity,
Other indexes based on customer reprovision (see table below)
0-2500mg / L (COD)
0.0-5.0mg / L (TP)
0.00-5.00 mg / L (chlorine)
0.01-5mg / L (ammonia)
1.0-1000NTU (turbidity)
MW18CM-05 multi-function Water Quality Monitor is an independent development of a new generation of water quality monitor. The device consists of character mode menus, buttons and simple operation intuitive, untrained personnel can quickly master the instrument to use. It uses a special seal-specific colorimetric tube, to facilitate the rapid determination of water quality objectives. Instruments used in the cold light source and narrow band interference filter technology, designed to achieve an accurate temperature compensation circuit, high stability determination. Apparatus compact integrated structure, digestion and measurement in one set. Inside the instrument is equipped with large-capacity flash memory, used to hold 30 and 1000 calibration curve measurements, in the case of power failure the data can be stored for decades without losing. Output interface can be real-time measurement data to print can also be measured after the completion of the printout. Built-in micro-power real time clock calibration and measurement time record, while the MCU digital processing technology ensures high automation equipment and high accuracy. To become a new generation of intelligent multi-functional equipment.
The instrument has auto-zero, the concentration of direct reading, linear regression, curve storage, extensions, automatic printing, data output and other functions, can meet a variety of surface water, groundwater, industrial and domestic wastewater, aquaculture and renewable water measurement needs. It can be widely used in environmental protection, scientific research and monitoring, production control and other fields, is the ideal of the modern environmental monitoring and management of special equipment.
Main Specifications
Accuracy ± 5% (all)
Repeatability ± 3% (all)
Operating Temperature 5 ~ 35 ℃
Relative humidity ≤ 80%
Maximum power consumption 100W
Weight 4.5Kg
Dimensions 320 × 330 × 180 (mm)
The main measure
0-2500mg / L (COD)
0.0-5.0mg / L (TP)
0.01-5mg / L (ammonia)
0-5.00 mg / L (chlorine)
1.0-1000NTU (turbidity)
Note: The base model, including COD, ammonia nitrogen, total phosphorus, other indicators may be optional.
Configuration: Host. Reagent. Software historical data :2010-03-10 version version 2010-03-10 2010-03-10 2010-03-10 version version version 2010-03-10 2010-03-10 2010-03-10 version version 2010-03 - 10 version