Flash Memory IC Chip MT29F2G08AACWP - Micron Technology - 2Gb x8, x16: NAND Flash Memory
Negotiable /Piece
Min.Order:1 Piece
IS41LV8205-60J - Integrated Silicon Solution, Inc - 2M x 8 (16-MBIT) DYNAMIC RAM WITH FAST PAGE MODE
Flash Memory IC Chip CY7C199-25DMB - Cypress Semiconductor - 32K x 8 Static RAM
ATMEGA64L-8MU ATMEL Corporation - 8-bit Microcontroller with 64K Bytes In-System Programmable Flash
NPN PNP Transistors 2SC5658 Datasheet (PDF) - Rohm - TRANSISTOR NPN 50V 0.15A VMT3
2N7002LT1G - ON Semiconductor - Small Signal MOSFET 60 V, 115 mA, N-Channel SOT-23
NPN PNP Transistors DTA114ESA - Rohm - Digital transistors (built-in resistors)
Quick Detail:
2Gb x8, x16: NAND Flash Memory
Description:
• Density2
: 2Gb (single die)
• Device width: x8, x16
• Configuration:
# of die # of CE# # of R/B# I/O
1 1 1 Common
• VCC: 2.7–3.6V
• VCC: 1.65–1.95V
• Package
– 48-pin TSOP type I CPL3
(lead-free plating, 3.3V only)
– 63-ball VFBGA (lead-free, 1.8V only)
• Operating temperature:
– Commercial (0°C to +70°C)
– Extended (–40°C to +85°C)
Applications:
• Open NAND Flash Interface (ONFI) 1.0-compliant
• Single-level cell (SLC) technology
• Organization
– Page size:
• x8: 2,112 bytes (2,048 + 64 bytes)
• x16: 1,056 words (1,024 + 32 words)
– Block size: 64 pages (128K + 4K bytes)
– Device size: 2Gb: 2,048 blocks
• READ performance
– Random READ: 25µs
– Sequential READ: 25ns (3.3V)
– Sequential READ: 35ns (1.8V)
• WRITE performance
– PROGRAM PAGE: 220µs (TYP, 3.3V)
– PROGRAM PAGE: 300µs (TYP, 1.8V)
– BLOCK ERASE: 500µs (TYP)
• Data retention: 10 years
• Endurance: 100,000 PROGRAM/ERASE cycles
• First block (block address 00h) guaranteed to be valid with ECC when shipped from factory1
• Industry-standard basic NAND Flash command set
• Advanced command set:
– PROGRAM PAGE CACHE MODE
– PAGE READ CACHE MODE
– One-time programmable (OTP) commands
– BLOCK LOCK (1.8V only)
– PROGRAMMABLE DRIVE STRENGTH
– READ UNIQUE ID
• Operation status byte provides a software method of detecting:
– Operation completion
– Pass/fail condition
– Write-protect status
• Ready/busy# (R/B#) signal provides a hardware method of detecting operation completion
• WP# signal: write protect entire device
• RESET required as first command after power-up
• INTERNAL DATA MOVE operations supported
• Alternate method of device initialization
(Nand_Init) after power up4 (Contact Factory)
Specifications:
Datasheets |
MT29FxG |
Product Photos |
48 TSOP Package |
Standard Package |
1,000 |
Category |
Integrated Circuits (ICs) |
Family |
Memory |
Series |
- |
Packaging |
Tape & Reel (TR) |
Format - Memory |
FLASH |
Memory Type |
FLASH - NAND |
Memory Size |
2G (256M x 8) |
Speed |
- |
Interface |
Parallel |
Voltage - Supply |
2.7 V ~ 3.6 V |
Operating Temperature |
0°C ~ 70°C |
Package / Case |
48-TFSOP (0.724\", 18.40mm Width) |
Supplier Device Package |
48-TSOP I |
Catalog Page |
1083 (CN081 PDF) |
Other Names |
557-1201-2 |
Competitive Advantage:
Warranty :180days for all goods
Free shipping:Order over $600 win a free shipment fee:goods weight below 3Kg.
Mega Source Electronics stocks components ready to ship. Hard to find, obsolete and highly allocated integrated circuits and semiconductors are all can be found by us.
Mega Source Electronics has established a well-developed logistics system and global logistics network, which can guarantee our service