Portable Leeb Hardness Tester / Portable Hardness Tester Model: CN61M/TH110
Negotiable /Piece
Min.Order:1 Piece
Product Overview
Permanently installed machinery or assembly of parts.
Mold cavity.
Heavy workpieces.
Pressure vessel, turbine generator and equipment failure analysis.
Measuring very small piece of space.
Bearings and other parts.
Material distinction between metal warehouse.
Large piece measuring a wide range of positions within the multiple rapid testing.
Features
Hardness can be achieved 6 (HL, HRB, HRC, HB, HV, HS) mutual conversion and conversion between the tensile strength
Hosts can be equipped with seven kinds of shock devices, replacement without re-calibration, automatic identification impact device type
Can display the measured values, average, date, impact direction, measuring the number of test materials, hardness and other information
A charging indicator and low voltage alarm
With indications of soft calibration
Test range 170-960HLD
Error indication error is less than ± 6HLD (HLD = 760 ± 30 pm)
Repeatability error of less than 6HLD (HLD = 760 ± 30 pm)
Operating Temperature 0 °C -40 °C
Operating Voltage 4.7V-6V
Battery Ni-MH battery pack (charging time about 4 hours)
Weight of about 0.615 kg (standard configuration: host + D type impact device)
Dimensions 235 × 90 × 47 (mm)
Configuration
The host (including printers) 1;
D-shock device 1
Small support ring 1;
Nylon brush 1;
High value standard in hardness block 1 block;
Charger 1;
Printing Paper Volume 1