Product Details
Using both magnetic and eddy current thickness measurement method, you can measure the magnetic non-magnetic metal substrates can also measure the thickness of coating non-magnetic metal substrates on the non-conductive coating thickness;
Has two measurements: continuous measurement (CONTINUE) and the single measurement mode (SINGLE);
Has two modes: direct mode (DIRECT), and group means (Appl);
There are five statistics: the average (MEAN), maximum (MAX), minimum (MIN), the number of tests (NO.), standard deviation (S. DEV);
Two methods can be used to calibrate the instrument and the basic calibration method can probe the system for error correction;
With storage function: can store 500 measurements;
With the print function: to print measurement, statistics, gauge, histogram;
Operation prompted a beep;
With the error function, through the screen display or beep for error;
There are two shutdown modes: manual mode and automatic shutdown shutdown mode.
Technical parameters
Probe Type F N
Eddy current principle of magnetic induction
Measurement range (μm) 0 ~ 1250 0 ~ 1250 of which: copper
Chrome (0 ~ 40)
Low resolution (μm) 0.1 0.1
Error-point calibration (um) ± (3% H +1) ± (3% H +1.5)
Two-point calibration (μm) ± [(1 ~ 3)% H +1] ± [(1 ~ 3)% H +1.5]
Test
The diameter of the smallest size (mm) Φ7 Φ5
Substrate critical thickness (mm) 0.5 0.3
SD1-TT210 digital coating thickness gauge standard
SD1-TT210 host 1
Standard chip 5
Matrix 2
AAA-type 1.5V (7) dry 2
Instrument Pack 1
Manual 1
Optional
TA220S printer 1 set
Communications cable 1
Communications Software 1
Ambient Temperature 0 ℃ ~ 40 ℃
Humidity 20% RH ~ 90% RH
No strong magnetic field
Power supply: two AAA-type 1.5V (7) dry
Dimensions and weight: Dimensions 110mm × 50 mm × 23 mm
Weight: about 100g