TS0800F 8-port 10/100MbpsPoE switch with 8(or4) port PoE. The PoE ports can automatically detect andsupply power to IEEE802.3af/at compliant Powered Devices (PD). The electricalpower and data transmission on the same cable can expand your network to theplaces where no power lines or outlets, where you can install devices such asAPs, IP cameras, or IP phones etc.

TS0800Fprovides a simple, cost- effective, and non-blocking wire-speed performancewith 11-inch metal shape for desktop deployment in compact housing, office ordepartment network application. 

Features

Interface information

8-Port 10/100Mbps Fast Ethernet

8(or 4)-Port PoE

PoE(Power over Ethernet）

Complies with IEEE802.3af/at Power over Ethernet

Supports PoE Power up to 32W for each PoE port

Auto detect power device

PoE Overload Alarm LED

Remote power and Data feeding up to 100m

Switch

Flow Control for Full Duplex operation and backpressure for Half Duplex Operation

2K MAC address, automatic address learning andaddress aging

Support Energy-Efficient Ethernet (EEE) function(IEEE802.3az)

Built-in power supply can be chosen by thecustomer

Key Features and Benefits

PoE Features

The TS0800F can provide up to 32 Watts of powerto attached devices, such as VoIP phones, wireless access points; surveillancecameras etc, all over existing cat. 5cables. The switch eliminates the need forindividual power sources for devices in the network, saving on costs for powercables and avoiding power outlet availability issues.

PoE Power Usage Display

The TS0800F helps users to monitor current statusof PoE power usage easily and efficiently by its intelligent PoE Managementfeature of LED indication, there are two orange LEDs named “max” located onleft side of the front panel. When Port 1-4 output is >= 80%, the LED will be lighted up, when Port 1-4output is> = 100%; the LED will blink to notify customers for better PoEallocation. If PoE Power consumption over 100%, the system will cut off thepower of the lowest-priority port.Priority 1(port1 > port 2 >port 3 > port 4), Priority 2(port 5 > port 6 >port 7> port 8).

Application

TS0800Fis an ideal solution for IEEE 802.3af and High Power IEEE 802.3at Power overEthernet (PoE) application. it is designed specifically to satisfy the growingdemand of higher power consuming network PD (powered devices) such as PTZ (Pan,Tilt & Zoom) / Speed Dome network cameras, multi- channel (802.11a/b/g/n)wireless LAN access points and other network devices by providing double PoEpower than conventional 802.3af PoE currently.