Delivery Time:35 days
Certification:None

Slot Type Commutator Armature Winding Machine For Power Tool Motor Rotor

Quick Detail:

1. This machine is used for slot commutator armature winding. 

2. It is controlled by PLC.

3. Main electrical components are imported from Korea and Japan.

4. It is suitable for power tool motor armature and it can wind automatically.

Description:

AUTOMATIC SLOT COMMUTATOR ARMATURE WINDINGM MACHINE

This machine is used for slot commutator armature winding, it can wind automatically. Equipped with touch screen and PLC. Winding parameter could be set and modified on the screen. We also have armature winding machine equipped with conveyor, operator only need to put several pieces of armature on the conveyor at one time, then machine will finish all the armatures automatically. Below parameter is our standard machine, we could produce machine according to customer\'s armature accordingly.

Applications: 

This machine is used for automatically hook type commutator armature winding and power tool armature.

Technical parameter:

Wire diameter	0.40~1.2mm
Armature diameter range	20~90mm
Armature stack length	10~60mm
Commutator diameter	8~60mm
Armature slot number	Odd, oven slot
Turns no.	0~99999
Flier fork speed	0~2000RPM
Indexing speed	0~2500RPM
Total power	4.5KW
Operation method	Step, Auto, JOG
Power source	AC380V 50/60Hz
Air source	5~7KG/cm2
Machine dimension	1530mm x 1280 mm x 1650mm

Main configuration:

PLC	MITSUBISHI
Servo control system	PANSONIC
Touch screen	MCGS7062KS
Pneumatic system	AIRTAC
Safety door and feeding device	Pneumatic
Main electrical components	Korea and Japan
Tensioner	Hysteresis
Linear guideway	HIWIN