Product Details

2Mbps,2-Wire,Ethernet Bridge:MDSL-T

Brand Name
Place of Origin China
Model Number

Product Features

2Mbps,2-Wire,Ethernet Bridge:MDSL-T
 
contact:Cenny
E-mail:cenny[at]
MSN:cenny.xu[at]

Features & Benefits
 

>> 2-wire 2.3Mbps MSDSL modem
>> the distance can be reached 3.29km in 24AWG(0.5mm) corresponding line and 2.51km in 26AWG(0.4mm) corresponding line
>> use the technology of MSDSL multi rates digital consumer line, expand the range of transmitting data In 24AWG(0.5mm)line, the longest transmitting distance is 6.25km.
>> support 8 kind of speed rates from 256K to 2320K
>> 10/100BaseT(UTP)LAN interface, and be self-adapting
>> according with IEE802.3 / IEE802.3u / Ethernet
>> it can store up to 1024 MAC. And MAC addresses have functions of automatically learning and updating.
>> low cost, simple manipulation, conveniently using, need not any software setting up
>>there are many indicator LEDs on the panel to display work state and line status of equipment
>> independent machine have two power supplying modes: 220V AC and -48V DC.

Overview
 

MDSL-T is ASIC-based 2-wire 2.3Mbps Ethernet bridge MSDSL modem. It uses SDSL(multi-rates digital end-user line) technology so that the data rate between two joint LANs can reach 2320 Kbps, the distance can be reached 3.29km in 24AWG(0.5mm) communication line and 2.51km in 26AWG(0.4mm) communication line. The modem can connect two LANs by a pair of twisted-pair to extend distance of LANs. With low cost, simple operation, and convenient use, it is suitable for cost-sensitive bridge connection or in LAN as stretcher or subsection. Ethernet conforms to standards of IEE802.3u and IEE802.3 and its speed rate is 10/100BaseT self-adaptively.

It can be installed and connected conveniently. One can use the DIP switch on rear panel to setup work mode and transmitting speed rate and connect cable. There are many indicator lights on the front panel to display work states and line status of equipment.
MDSL-T is a high-performance self-educated long-range Ethernet bridge. It can receive frame in MAC net-bridge of LAN and carry out transparent transmission of MAC addresses. It can store up to 1024 MAC subnet address. MDSL-T can learn automatically MAC address in the connected LAN and only transmit the aim address to frame in another LAN.

Specifications
 

LAN

Standard :
 according with IEE802.3/Ethernet
 
Work mode:
 full duplex/ half duplex
 
Data rate :
 10/100Mbps ;self-adaptively
 
Physical interface:
 10 /100BaseT(UTP);shielded RJ-45
 

Ethernet

LAN Table:
 1024, learning automatically and
 
 
 refreshing automatically
 

WAN(E1/G.703)

Data rate:
 256kbps 384kbps 1024kbps
 
 
 1280kbps 1536kbps
 
 
 2048kbps 2320kbps
 
Transmission mode:
 synchronous full duplex; HDLC
 
 
 high-degree data link
 
Line interface:
 impedance 135ohm, physical
 
 
 interface RJ45, with pin 4 and pin
 
 
 5 (middle 2 lines)
 
Power supply:
 20V +/- 10%,50Hz;48VDC(optional)
  
Power consumption:
 5W;
  
Volume:
 225mm*145mm*40mm;
  
 
 9"L*5.8"W*1.6"H
 
 
 
I'm Cenny, a sales manager of Bell Data Communication Equipments Co., Ltd , a China local manufacturer .  Our products brand is VeeCOM(LANBEL) .
  Our major products series are:G.703/E1 to V.35 and ethernet Converters/DSL CPE/ADSL SYSTEM/Multiplexers/Bridges/Modems/Switch/E1&T1 equipment/Fiber Equipment/wireless modem/ADSL modem(The particular products are shown on our website:
or the website in alibaba: / ).

contact:Cenny


E-mail:cenny[at]

MSN:cenny.xu[at]

Company: Changzhou Bell Data Communication Equipments Co., Ltd

Website:

Add: 15A Zhongnan Building, NO.33 Guanhe west road, Changzhou, Jiangsu, China

Tel: +86-0519-6809961 6809962 6809963 6809965

Fax: +86-0519- 6809967

Postalcode: 213003

trademanager ID:cgs_cenny

You May Like

Find Similar Products By Category

You May Like

View More
Chat Now Contact Now