Delivery Time:in 90-100 days

CR / HRC Hydraulic Cutting Machine For Hot Rolled Coils , Galvanized

Application:CR/HRC/stainless steel /galvanized thickness of coil plate:1-6mm width of coil plate:1600mm coil weight:20MT(max) line speed:0-40m/min

Specifications:

Application:	CR/HRC/stainless steel /galvanized and so on
thickness of coil plate:	1-6mm
width of coil plate:	1600mm
coil weight:	20MT(max)
coil I.D:	Ф450-800
coil O.D:	Ф2000mm
the diameter of slitting blade shaft	Ф240
slitting blade:	Φ240Xφ420X20
material of slitting blade:	9CrSi
the hardness of slitting blade:	HRC58°-60°
recoiler I.D:	φ508
power:	380V/50Hz/3Ph
tolerance of width error:	≤±0.05mm/2M
line speed	0-40m/min
area of the whole machine:	30m(L)x6m(W)
Production orientation	from left to right

1. Hydraulic entry coil car                         

    ◆The car can move levelly and vertically, which is convenient for putting the steel coils into the de-coiler.

    ◆It is driven vertically by hydraulic cylinder with four guide pillars.   

    ◆The level movement is driven by cycloid motor .

    ◆The capacity it can carry is 20 Tons(MAX).

2. Hydraulic double bracing de-coiler

   ◆Supporting the coils and doing uncoiling.

   ◆It is designed with the double hydraulic movable structure

   ◆The hydraulic cylinders on both sides drive the landscape orientation movement.

   ◆It is equipped with the brake devices and taper decoiler and the hydraulic brake wheel.

3. Press and straightening machine

   ◆ It is good for improve the plates\' surface and do straightening then guiding the steel plates into next process.

   ◆It is made by 5 leveling rollers , drive device , 2 pinch roller and frame. Every rollers is the main driving rollers.

   ◆The gap between rollers can be adjusted manually to make sure the leveling quality.

   ◆Drive model: all the rollers and gear box drives by motor.

4. Hydraulic cutting machine

    ◆it is used to make the plates easy to the next process by cutting the head even.

   ◆It can also used to make the big coils divide into several small coils.

5. Transition table1

6. Side guide device

    ◆It uses the vertical rollers of both sides to guide the plates into the slitting machine correctly.

    ◆The guide rollers are adjusted by the rods on both sides . The width range is 500-1600mm.

    ◆It is equipped with the hydraulic press and damping device to make sure the slitting precision.

7. Slitting machine

    ◆Power part: This is composed of power-stand, decelerator, 75KW direct current motor, gear distributing case, coupler, spindle, connecting-cover, etc.

    ◆Host machine: This is composed of bottom-stand, fixed bracket, big slide, knife pivot (φ240mm, 2pcs), movable bracket, slide, the front and back adjustable device of bracket, knife pivot lifting and pressing down adjustment device, accompany of blade, separating cover, rubber band and 10 blades with the machine

    ◆It change the blades through moving out the bracket hydraulically and is very convenient and fast.

8. Scrap winder

    ◆It consists of base, the shaft and plate of scrap material, friction wheel, supporting wheel chain, chain, decelerator and moment motor.

    ◆It is used to pack and wind