double-row bearing,Tapered Roller Bearing a conical inner and outer ring raceway, Tapered Roller arranged in between, all conical surface projection lines in the bearing axis to meet the same point, this design enables Tapered Roller Bearing particularly suited to bear composite (radial and axial) loads. Tapered Roller Bearings can best way to stress distribution in the Roller Raceway contact with the surface, thereby enhancing the reliability and affordability of error of perspective. LHB provides a wide range of sizes series of Tapered Roller Bearings, single row, matching single, double row, and four Tapered Roller Bearings can meet a wide range of applications. We can produce the diameter from 15mm~360mm LHB single row tapered roller bearings,Following is the internal structure of LHB different product descriptions. B Steeper contact angle tapered roller bearing Tapered Roller Bearing apply to the main radial load to bear the main radial and axial load combined, and the large cone angle tapered roller bearings can be used to bear the axial load-based track, combined axial loading. Bearing such as the separation-bearing, the inner ring (including the tapered roller and cage) and the outer ring can be installed in the installation and use of the process of adjustment may be bearing the axial and radial clearance clearance, can also advance Tight installation. The main structure DF single row tapered roller bearings-30000 Bearing this case to limit the shaft in one direction or the axial displacement, under the direction of an axial load. In the radial load will have additional axial force, in general support of the two-axis, the bearing inner and outer ring of the end of the same name relative to install, such as the use of a separate, and its axial force applied must be greater than the additional Axial force. 313 series of tapered roller bearings with large contact angle (27 ° -30 °), can bear a greater axial loading. Other series bearings in the contact angle between 10 ° -18 °. Single row tapered roller bearings size table gives the ISO355-size tapered roller bearings, code-named series, bearing only the exchange of reference. Tapered Roller Bearing Axial Clearance of the size of the bearing on the ability to affect a lot of good work. When the axial clearance over an hour, the temperature rise; axial clearance is too large, easily damaged bearings. Theref